lkml.org 
[lkml]   [2020]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 09/12] media: uvcvideo: Implement UVC_QUIRK_PRIVACY_DURING_STREAM
Hi Ricardo,

Thank you for the patch.

On Mon, Dec 21, 2020 at 05:48:16PM +0100, Ricardo Ribalda wrote:
> Some devices, can only read the privacy_pin if the device is

s/devices,/devices/

> streaming.
>
> This patch implement a quirk for such devices, in order to avoid invalid
> reads and/or spurious events.
>
> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
> ---
> drivers/media/usb/uvc/uvc_driver.c | 57 ++++++++++++++++++++++++++++--
> drivers/media/usb/uvc/uvc_queue.c | 3 ++
> drivers/media/usb/uvc/uvcvideo.h | 4 +++
> 3 files changed, 61 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
> index 72516101fdd0..7af37d4bd60a 100644
> --- a/drivers/media/usb/uvc/uvc_driver.c
> +++ b/drivers/media/usb/uvc/uvc_driver.c
> @@ -7,6 +7,7 @@
> */
>
> #include <linux/atomic.h>
> +#include <linux/dmi.h>
> #include <linux/gpio/consumer.h>
> #include <linux/kernel.h>
> #include <linux/list.h>
> @@ -1472,6 +1473,17 @@ static int uvc_parse_control(struct uvc_device *dev)
> /* -----------------------------------------------------------------------------
> * Privacy GPIO
> */

There should be a blank line here.

> +static bool uvc_gpio_is_streaming(struct uvc_device *dev)
> +{
> + struct uvc_streaming *streaming;
> +
> + list_for_each_entry(streaming, &dev->streams, list) {
> + if (uvc_queue_streaming(&streaming->queue))
> + return true;
> + }
> +
> + return false;
> +}
>
>

But not too blank lines here.

> static u8 uvc_gpio_update_value(struct uvc_device *dev,
> @@ -1499,7 +1511,12 @@ static int uvc_gpio_get_cur(struct uvc_device *dev, struct uvc_entity *entity,
> if (cs != UVC_CT_PRIVACY_CONTROL || size < 1)
> return -EINVAL;
>
> + if ((dev->quirks & UVC_QUIRK_PRIVACY_DURING_STREAM) &&
> + !uvc_gpio_is_streaming(dev))
> + return -EBUSY;
> +
> *(uint8_t *)data = uvc_gpio_update_value(dev, entity);
> +
> return 0;
> }
>
> @@ -1528,19 +1545,50 @@ static struct uvc_entity *uvc_gpio_find_entity(struct uvc_device *dev)
> return NULL;
> }
>
> -static irqreturn_t uvc_gpio_irq(int irq, void *data)
> +void uvc_privacy_gpio_event(struct uvc_device *dev)
> {
> - struct uvc_device *dev = data;
> struct uvc_entity *unit;
>
> +
> unit = uvc_gpio_find_entity(dev);
> if (!unit)
> - return IRQ_HANDLED;
> + return;
>
> uvc_gpio_update_value(dev, unit);
> +}
> +
> +static irqreturn_t uvc_gpio_irq(int irq, void *data)
> +{
> + struct uvc_device *dev = data;
> +
> + /* Ignore privacy events during streamoff */
> + if (dev->quirks & UVC_QUIRK_PRIVACY_DURING_STREAM)
> + if (!uvc_gpio_is_streaming(dev))
> + return IRQ_HANDLED;

I'm still a bit concerned of race conditions. When stopping the stream,
vb2_queue.streaming is set to 0 after calling the driver's .stop_stream()
handler. This means that the device will cut power before
uvc_gpio_is_streaming() can detect that streaming has stopped, and the
GPIO could thus trigger an IRQ.

You mentioned that devices have a pull-up or pull-down on the GPIO line.
As there are only two devices affected, do you know if it's a pull-up or
pull-down ? Would it be worse to expose that state to userspace than to
return -EBUSY when reading the control ?

> +
> + uvc_privacy_gpio_event(dev);
> +
> return IRQ_HANDLED;
> }
>
> +static const struct dmi_system_id privacy_valid_during_streamon[] = {
> + {
> + .ident = "HP Elite c1030 Chromebook",
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "HP"),
> + DMI_MATCH(DMI_PRODUCT_NAME, "Jinlon"),
> + },
> + },
> + {
> + .ident = "HP Pro c640 Chromebook",
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "HP"),
> + DMI_MATCH(DMI_PRODUCT_NAME, "Dratini"),
> + },
> + },
> + { } /* terminate list */
> +};
> +
> static int uvc_gpio_parse(struct uvc_device *dev)
> {
> struct uvc_entity *unit;
> @@ -1577,6 +1625,9 @@ static int uvc_gpio_parse(struct uvc_device *dev)
>
> list_add_tail(&unit->list, &dev->entities);
>
> + if (dmi_check_system(privacy_valid_during_streamon))
> + dev->quirks |= UVC_QUIRK_PRIVACY_DURING_STREAM;

This will also match any external UVC camera plugged to one of the
affected systems, right ? It shouldn't matter in practice as those
devices won't have a GPIO entity.

I suppose we can't match on VID:PID instead because the same VID:PID is
used in both devices affected by this issue, and devices immune to it ?

> +
> return 0;
> }
>
> diff --git a/drivers/media/usb/uvc/uvc_queue.c b/drivers/media/usb/uvc/uvc_queue.c
> index cd60c6c1749e..e800d491303f 100644
> --- a/drivers/media/usb/uvc/uvc_queue.c
> +++ b/drivers/media/usb/uvc/uvc_queue.c
> @@ -337,9 +337,12 @@ int uvc_dequeue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf,
> int uvc_queue_streamon(struct uvc_video_queue *queue, enum v4l2_buf_type type)
> {
> int ret;
> + struct uvc_streaming *stream = uvc_queue_to_stream(queue);

Please swap the two lines.

>
> mutex_lock(&queue->mutex);
> ret = vb2_streamon(&queue->queue, type);
> + if (stream->dev->quirks & UVC_QUIRK_PRIVACY_DURING_STREAM)
> + uvc_privacy_gpio_event(stream->dev);

Even when vb2_streamon() failed ?

> mutex_unlock(&queue->mutex);
>
> return ret;
> diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
> index 079a407ebba5..32c1ba246d97 100644
> --- a/drivers/media/usb/uvc/uvcvideo.h
> +++ b/drivers/media/usb/uvc/uvcvideo.h
> @@ -209,6 +209,7 @@
> #define UVC_QUIRK_RESTORE_CTRLS_ON_INIT 0x00000400
> #define UVC_QUIRK_FORCE_Y8 0x00000800
> #define UVC_QUIRK_FORCE_BPP 0x00001000
> +#define UVC_QUIRK_PRIVACY_DURING_STREAM 0x00002000
>
> /* Format flags */
> #define UVC_FMT_FLAG_COMPRESSED 0x00000001
> @@ -826,6 +827,9 @@ extern const struct v4l2_file_operations uvc_fops;
> int uvc_mc_register_entities(struct uvc_video_chain *chain);
> void uvc_mc_cleanup_entity(struct uvc_entity *entity);
>
> +/* Privacy gpio */
> +void uvc_privacy_gpio_event(struct uvc_device *dev);
> +
> /* Video */
> int uvc_video_init(struct uvc_streaming *stream);
> int uvc_video_suspend(struct uvc_streaming *stream);

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2020-12-22 11:32    [W:0.169 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site