lkml.org 
[lkml]   [2020]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] phy: phy-bcm4908-usb: Add drivers for USB PHYs
Date
From: Rafał Miłecki <rafal@milecki.pl>

This driver initializes BCM4908 USB PHYs so USB can be utilized.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
drivers/phy/broadcom/Kconfig | 9 ++
drivers/phy/broadcom/Makefile | 1 +
drivers/phy/broadcom/phy-bcm4908-usb.c | 204 +++++++++++++++++++++++++
3 files changed, 214 insertions(+)
create mode 100644 drivers/phy/broadcom/phy-bcm4908-usb.c

diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index a1f1a9c90d0d..ff2ca2b77f38 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -78,6 +78,15 @@ config PHY_NS2_USB_DRD

If unsure, say N.

+config PHY_BCM4908_USB
+ tristate "Broadcom BCM4908 USB PHYs support"
+ depends on OF && (ARCH_BCM4908 || COMPILE_TEST)
+ select GENERIC_PHY
+ default ARCH_BCM4908
+ help
+ Enable this to support the Broadcom BCM4908 USB 2.0 PHY and USB 3.0
+ PHY. This driver initializes PHYs so USB can be utilized.
+
config PHY_BRCM_SATA
tristate "Broadcom SATA PHY driver"
depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || \
diff --git a/drivers/phy/broadcom/Makefile b/drivers/phy/broadcom/Makefile
index 7024127f86ad..8e6a9b748421 100644
--- a/drivers/phy/broadcom/Makefile
+++ b/drivers/phy/broadcom/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o
obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o
obj-$(CONFIG_PHY_NS2_USB_DRD) += phy-bcm-ns2-usbdrd.o
+obj-$(CONFIG_PHY_BCM4908_USB) += phy-bcm4908-usb.o
obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o
obj-$(CONFIG_PHY_BRCM_USB) += phy-brcm-usb-dvr.o

diff --git a/drivers/phy/broadcom/phy-bcm4908-usb.c b/drivers/phy/broadcom/phy-bcm4908-usb.c
new file mode 100644
index 000000000000..bf3803a11710
--- /dev/null
+++ b/drivers/phy/broadcom/phy-bcm4908-usb.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013 Broadcom
+ * Copyright (C) 2020 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/delay.h>
+#include <linux/mdio.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+
+enum bcm4908_usb_ver {
+ BCM4908_UNKNOWN,
+ BCM4908_USB_2,
+ BCM4908_USB_3,
+};
+
+struct bcm4908_usb {
+ struct mdio_device *mdiodev;
+ struct device *dev;
+ struct phy *phy;
+ enum bcm4908_usb_ver ver;
+};
+
+static int bcm4908_usb_mdio_phy_read(struct bcm4908_usb *usb, u16 reg)
+{
+ struct mdio_device *mdiodev = usb->mdiodev;
+
+ return mdiobus_read(mdiodev->bus, mdiodev->addr, reg);
+}
+
+static int bcm4908_usb_mdio_phy_write(struct bcm4908_usb *usb, u16 reg,
+ u16 value)
+{
+ struct mdio_device *mdiodev = usb->mdiodev;
+
+ return mdiobus_write(mdiodev->bus, mdiodev->addr, reg, value);
+}
+
+static int bcm4908_usb_2_init(struct bcm4908_usb *usb)
+{
+ int err;
+
+ /* Eye fix */
+
+ err = bcm4908_usb_mdio_phy_write(usb, 0x1f, 0x80a0);
+ if (err < 0)
+ return err;
+
+ err = bcm4908_usb_mdio_phy_write(usb, 0x0a, 0xc6a0);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static void bcm4908_usb_3_ssc_enable(struct bcm4908_usb *usb)
+{
+ u32 val;
+
+ /* Enable USB 3.0 TX spread spectrum */
+ bcm4908_usb_mdio_phy_write(usb, 0x1f, 0x8040);
+
+ val = bcm4908_usb_mdio_phy_read(usb, 0x01);
+ val |= 0x0f;
+ bcm4908_usb_mdio_phy_write(usb, 0x01, val);
+
+ bcm4908_usb_mdio_phy_write(usb, 0x1f, 0x9040);
+
+ val = bcm4908_usb_mdio_phy_read(usb, 0x01);
+ val |= 0x0f;
+ bcm4908_usb_mdio_phy_write(usb, 0x01, val);
+}
+
+static void bcm4908_usb_3_enable_pipe_reset(struct bcm4908_usb *usb)
+{
+ u32 val;
+
+ /* Re-enable USB 3.0 pipe reset */
+ bcm4908_usb_mdio_phy_write(usb, 0x1f, 0x8000);
+
+ val = bcm4908_usb_mdio_phy_read(usb, 0x0f);
+ val |= 0x200;
+ bcm4908_usb_mdio_phy_write(usb, 0x0f, val);
+}
+
+
+static void bcm4908_usb_3_enable_sigdet(struct bcm4908_usb *usb)
+{
+ u32 val;
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ u32 offset = i * 0x1000;
+
+ /* Set correct default for sigdet */
+ bcm4908_usb_mdio_phy_write(usb, 0x1f, 0x8080 + offset);
+
+ val = bcm4908_usb_mdio_phy_read(usb, 0x05);
+ val = (val & ~0x800f) | 0x800d;
+ bcm4908_usb_mdio_phy_write(usb, 0x05, val);
+ }
+}
+
+
+static void bcm4908_usb_3_enable_skip_align(struct bcm4908_usb *usb)
+{
+ u32 val;
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ u32 offset = i * 0x1000;
+
+ /* Set correct default for SKIP align */
+ bcm4908_usb_mdio_phy_write(usb, 0x1f, 0x8060 + offset);
+
+ val = bcm4908_usb_mdio_phy_read(usb, 0x01);
+ val |= 0x200;
+ bcm4908_usb_mdio_phy_write(usb, 0x01, val);
+ }
+}
+
+static int bcm4908_usb_3_init(struct bcm4908_usb *usb)
+{
+ struct device *dev = usb->dev;
+
+ bcm4908_usb_3_ssc_enable(usb);
+ bcm4908_usb_3_enable_pipe_reset(usb);
+ bcm4908_usb_3_enable_sigdet(usb);
+ bcm4908_usb_3_enable_skip_align(usb);
+
+ mdelay(300);
+
+ return 0;
+}
+
+static int bcm4908_usb_init(struct phy *phy)
+{
+ struct bcm4908_usb *usb = phy_get_drvdata(phy);
+
+ switch (usb->ver) {
+ case BCM4908_USB_2:
+ return bcm4908_usb_2_init(usb);
+ case BCM4908_USB_3:
+ return bcm4908_usb_3_init(usb);
+ default:
+ WARN_ON(1);
+ return -EINVAL;
+ }
+}
+
+static const struct phy_ops bcm4908_usb_phy_ops = {
+ .init = bcm4908_usb_init,
+ .owner = THIS_MODULE,
+};
+
+static int bcm4908_usb_probe(struct mdio_device *mdiodev)
+{
+ struct device *dev = &mdiodev->dev;
+ struct phy_provider *phy_provider;
+ struct bcm4908_usb *usb;
+
+ usb = devm_kzalloc(dev, sizeof(*usb), GFP_KERNEL);
+ if (!usb)
+ return -ENOMEM;
+
+ usb->dev = dev;
+ usb->mdiodev = mdiodev;
+ usb->ver = (uintptr_t)of_device_get_match_data(dev);
+
+ usb->phy = devm_phy_create(dev, NULL, &bcm4908_usb_phy_ops);
+ if (IS_ERR(usb->phy)) {
+ dev_err(dev, "Failed to create PHY\n");
+ return PTR_ERR(usb->phy);
+ }
+
+ phy_set_drvdata(usb->phy, usb);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id bcm4908_usb_id_table[] = {
+ { .compatible = "brcm,bcm4908-usb2-phy", .data = (void *)BCM4908_USB_2 },
+ { .compatible = "brcm,bcm4908-usb3-phy", .data = (void *)BCM4908_USB_3 },
+ {},
+};
+
+static struct mdio_driver bcm4908_usb_mdio_driver = {
+ .mdiodrv = {
+ .driver = {
+ .name = "bcm4908_usb",
+ .of_match_table = bcm4908_usb_id_table,
+ },
+ },
+ .probe = bcm4908_usb_probe,
+};
+
+mdio_module_driver(bcm4908_usb_mdio_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, bcm4908_usb_id_table);
--
2.26.2
\
 
 \ /
  Last update: 2020-12-02 21:51    [W:0.033 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site