lkml.org 
[lkml]   [2020]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/5] dt-bindings: remoteproc: Add PRU consumer bindings
On Fri, Dec 11, 2020 at 03:29:29PM +0100, Grzegorz Jaszczyk wrote:
> From: Suman Anna <s-anna@ti.com>
>
> Add a YAML binding document for PRU consumers. The binding includes
> all the common properties that can be used by different PRU consumer
> or application nodes and supported by the PRU remoteproc driver.
> These are used to configure the PRU hardware for specific user
> applications.
>
> The application nodes themselves should define their own bindings.
>
> Co-developed-by: Tero Kristo <t-kristo@ti.com>
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> Signed-off-by: Suman Anna <s-anna@ti.com>
> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
> ---
> .../bindings/remoteproc/ti,pru-consumer.yaml | 64 +++++++++++++++++++
> 1 file changed, 64 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
> new file mode 100644
> index 000000000000..2c5c5e2b6159
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
> @@ -0,0 +1,64 @@
> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/ti,pru-consumer.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Common TI PRU Consumer Binding
> +
> +maintainers:
> + - Suman Anna <s-anna@ti.com>
> +
> +description: |
> + A PRU application/consumer/user node typically uses one or more PRU device
> + nodes to implement a PRU application/functionality. Each application/client
> + node would need a reference to at least a PRU node, and optionally define
> + some properties needed for hardware/firmware configuration. The below
> + properties are a list of common properties supported by the PRU remoteproc
> + infrastructure.
> +
> + The application nodes shall define their own bindings like regular platform
> + devices, so below are in addition to each node's bindings.
> +
> +properties:
> + prus:

ti,prus

> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: phandles to the PRU, RTU or Tx_PRU nodes used
> +
> + firmware-name:
> + $ref: /schemas/types.yaml#/definitions/string-array
> + description: |
> + firmwares for the PRU cores, the default firmware for the core from
> + the PRU node will be used if not provided. The firmware names should
> + correspond to the PRU cores listed in the 'prus' property
> +
> + ti,pruss-gp-mux-sel:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + enum: [0, 1, 2, 3, 4]
> + description: |
> + array of values for the GP_MUX_SEL under PRUSS_GPCFG register for a PRU.
> + This selects the internal muxing scheme for the PRU instance. Values
> + should correspond to the PRU cores listed in the 'prus' property. The
> + GP_MUX_SEL setting is a per-slice setting (one setting for PRU0, RTU0,
> + and Tx_PRU0 on K3 SoCs). Use the same value for all cores within the
> + same slice in the associative array. If the array size is smaller than
> + the size of 'prus' property, the default out-of-reset value (0) for the
> + PRU core is used.
> +
> +required:
> + - prus
> +
> +dependencies:
> + firmware-name: [ prus ]
> + ti,pruss-gp-mux-sel: [ prus ]
> +
> +additionalProperties: true
> +
> +examples:
> + - |
> + /* PRU application node example */
> + pru-app {
> + prus = <&pru0>, <&pru1>;
> + firmware-name = "pruss-app-fw0", "pruss-app-fw1";
> + ti,pruss-gp-mux-sel = <2>, <1>;
> + };
> --
> 2.29.0
>

\
 
 \ /
  Last update: 2020-12-15 00:01    [W:0.085 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site