lkml.org 
[lkml]   [2020]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 32/54] x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytes
Date
From: Masami Hiramatsu <mhiramat@kernel.org>

commit 4e9a5ae8df5b3365183150f6df49e49dece80d8c upstream.

Since insn.prefixes.nbytes can be bigger than the size of
insn.prefixes.bytes[] when a prefix is repeated, the proper check must
be

insn.prefixes.bytes[i] != 0 and i < 4

instead of using insn.prefixes.nbytes.

Introduce a for_each_insn_prefix() macro for this purpose. Debugged by
Kees Cook <keescook@chromium.org>.

[ bp: Massage commit message, sync with the respective header in tools/
and drop "we". ]

Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints")
Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/160697103739.3146288.7437620795200799020.stgit@devnote2
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/x86/include/asm/insn.h | 15 +++++++++++++++
arch/x86/kernel/uprobes.c | 10 ++++++----
tools/arch/x86/include/asm/insn.h | 15 +++++++++++++++
3 files changed, 36 insertions(+), 4 deletions(-)

--- a/arch/x86/include/asm/insn.h
+++ b/arch/x86/include/asm/insn.h
@@ -195,6 +195,21 @@ static inline int insn_offset_immediate(
return insn_offset_displacement(insn) + insn->displacement.nbytes;
}

+/**
+ * for_each_insn_prefix() -- Iterate prefixes in the instruction
+ * @insn: Pointer to struct insn.
+ * @idx: Index storage.
+ * @prefix: Prefix byte.
+ *
+ * Iterate prefix bytes of given @insn. Each prefix byte is stored in @prefix
+ * and the index is stored in @idx (note that this @idx is just for a cursor,
+ * do not change it.)
+ * Since prefixes.nbytes can be bigger than 4 if some prefixes
+ * are repeated, it cannot be used for looping over the prefixes.
+ */
+#define for_each_insn_prefix(insn, idx, prefix) \
+ for (idx = 0; idx < ARRAY_SIZE(insn->prefixes.bytes) && (prefix = insn->prefixes.bytes[idx]) != 0; idx++)
+
#define POP_SS_OPCODE 0x1f
#define MOV_SREG_OPCODE 0x8e

--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -255,12 +255,13 @@ static volatile u32 good_2byte_insns[256

static bool is_prefix_bad(struct insn *insn)
{
+ insn_byte_t p;
int i;

- for (i = 0; i < insn->prefixes.nbytes; i++) {
+ for_each_insn_prefix(insn, i, p) {
insn_attr_t attr;

- attr = inat_get_opcode_attribute(insn->prefixes.bytes[i]);
+ attr = inat_get_opcode_attribute(p);
switch (attr) {
case INAT_MAKE_PREFIX(INAT_PFX_ES):
case INAT_MAKE_PREFIX(INAT_PFX_CS):
@@ -715,6 +716,7 @@ static const struct uprobe_xol_ops push_
static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
{
u8 opc1 = OPCODE1(insn);
+ insn_byte_t p;
int i;

switch (opc1) {
@@ -746,8 +748,8 @@ static int branch_setup_xol_ops(struct a
* Intel and AMD behavior differ in 64-bit mode: Intel ignores 66 prefix.
* No one uses these insns, reject any branch insns with such prefix.
*/
- for (i = 0; i < insn->prefixes.nbytes; i++) {
- if (insn->prefixes.bytes[i] == 0x66)
+ for_each_insn_prefix(insn, i, p) {
+ if (p == 0x66)
return -ENOTSUPP;
}

--- a/tools/arch/x86/include/asm/insn.h
+++ b/tools/arch/x86/include/asm/insn.h
@@ -195,6 +195,21 @@ static inline int insn_offset_immediate(
return insn_offset_displacement(insn) + insn->displacement.nbytes;
}

+/**
+ * for_each_insn_prefix() -- Iterate prefixes in the instruction
+ * @insn: Pointer to struct insn.
+ * @idx: Index storage.
+ * @prefix: Prefix byte.
+ *
+ * Iterate prefix bytes of given @insn. Each prefix byte is stored in @prefix
+ * and the index is stored in @idx (note that this @idx is just for a cursor,
+ * do not change it.)
+ * Since prefixes.nbytes can be bigger than 4 if some prefixes
+ * are repeated, it cannot be used for looping over the prefixes.
+ */
+#define for_each_insn_prefix(insn, idx, prefix) \
+ for (idx = 0; idx < ARRAY_SIZE(insn->prefixes.bytes) && (prefix = insn->prefixes.bytes[idx]) != 0; idx++)
+
#define POP_SS_OPCODE 0x1f
#define MOV_SREG_OPCODE 0x8e


\
 
 \ /
  Last update: 2020-12-10 18:07    [W:1.006 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site