lkml.org 
[lkml]   [2020]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 22/54] i2c: imx: Dont generate STOP condition if arbitration has been lost
Date
From: Christian Eggers <ceggers@arri.de>

commit 61e6fe59ede155881a622f5901551b1cc8748f6a upstream.

If arbitration is lost, the master automatically changes to slave mode.
I2SR_IBB may or may not be reset by hardware. Raising a STOP condition
by resetting I2CR_MSTA has no effect and will not clear I2SR_IBB.

So calling i2c_imx_bus_busy() is not required and would busy-wait until
timeout.

Signed-off-by: Christian Eggers <ceggers@arri.de>
Tested (not extensively) on Vybrid VF500 (Toradex VF50):
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org # Requires trivial backporting, simple remove
# the 3rd argument from the calls to
# i2c_imx_bus_busy().
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/i2c/busses/i2c-imx.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)

--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -567,6 +567,8 @@ static void i2c_imx_stop(struct imx_i2c_
/* Stop I2C transaction */
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ if (!(temp & I2CR_MSTA))
+ i2c_imx->stopped = 1;
temp &= ~(I2CR_MSTA | I2CR_MTX);
if (i2c_imx->dma)
temp &= ~I2CR_DMAEN;
@@ -732,9 +734,12 @@ static int i2c_imx_dma_read(struct imx_i
*/
dev_dbg(dev, "<%s> clear MSTA\n", __func__);
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ if (!(temp & I2CR_MSTA))
+ i2c_imx->stopped = 1;
temp &= ~(I2CR_MSTA | I2CR_MTX);
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
- i2c_imx_bus_busy(i2c_imx, 0);
+ if (!i2c_imx->stopped)
+ i2c_imx_bus_busy(i2c_imx, 0);
} else {
/*
* For i2c master receiver repeat restart operation like:
@@ -857,9 +862,12 @@ static int i2c_imx_read(struct imx_i2c_s
dev_dbg(&i2c_imx->adapter.dev,
"<%s> clear MSTA\n", __func__);
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ if (!(temp & I2CR_MSTA))
+ i2c_imx->stopped = 1;
temp &= ~(I2CR_MSTA | I2CR_MTX);
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
- i2c_imx_bus_busy(i2c_imx, 0);
+ if (!i2c_imx->stopped)
+ i2c_imx_bus_busy(i2c_imx, 0);
} else {
/*
* For i2c master receiver repeat restart operation like:

\
 
 \ /
  Last update: 2020-12-10 17:57    [W:0.346 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site