lkml.org 
[lkml]   [2020]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v2 00/21] arm64: sunxi: Initial Allwinner H616 SoC support
    Date
    Hi,

    this is the quite expanded second version of the support series for the
    Allwinner H616 SoC.
    Besides many fixes for the bugs discovered by the diligent reviewers
    (many thanks for that!) this version adds some patches to support some
    slightly changed devices, like the second EMAC and the AXP not having
    an interrupt.
    Also I added quite some DT binding doc patches.
    USB still does not work, but I include the patches anyway, hoping that
    someone can help spotting the issue.
    For a more detailed changelog see below.

    Thanks!
    Andre

    ==================
    This series gathers patches to support the Allwinner H616 SoC. This is
    a rather uninspired SoC (Quad-A53 with the usual peripherals), but
    allows for some cheap development boards and TV boxes, and supports
    up to 4GB of DRAM.

    Various DT binding patches are sprinkled throughout the series, to add
    the new compatible names right before they are used.
    Patch 1/21 is the usual drive-by fix, discovered while staring at
    the H6 clock code.
    Patch 3 and 4 add pinctrl support, with the "-R" controller now being
    crippled down to two I2C pins only. If we grow tired of repeating this
    exercise for every new SoC variant, I am happy to revive my more
    versatile sunxi pinctrl driver effort from a few years back [1].
    Patch 6 and 7 add clock support. For the -R clock this is shared with
    the H6 code, as the clocks are identical, with the H616 just having
    fewer of them. The main clocks are different enough to warrant a separate
    file.
    Patch 08/21 is pulling a patch from Yangtao's A100 series, since we need
    the same fix for MMC support. This will probably be merged separately,
    I just include this here to provide a bootable solution.
    Patch 10 teaches the AXP MFD driver to get along without having an
    interrupt, as the H616 apparently does not have an NMI controller anymore.
    Patch 12 and 13 add some tweaks to the syscon and EMAC driver, to deal
    with the second EMAC clock used for the second Ethernet controller.
    Patches 14 and 15 *try* to add USB support. The same approach works with
    the very similar U-Boot PHY driver, but for some reason still fail in
    Linux. Maybe someone spots the issue and can help fixing it?

    The remaining patches add DT bindings, which just add the new compatible
    string along with an existing name as a fallback string.
    Eventually we get the .dtsi for the SoC in patch 19, and the .dts for
    the OrangePi Zero2 board[2] in the last patch.

    We have U-Boot and Trusted-Firmware support in a working state, booting
    via FEL and even TFTPing kernels work already [3][4].

    Many thanks to Jernej for his tremendous help on this, also for the
    awesome input and help from the #linux-sunxi Freenode channel.

    The whole series can also be found here:
    https://github.com/apritzel/linux/commits/h616-v2

    Happy reviewing!

    Cheers,
    Andre

    [1] https://patchwork.ozlabs.org/project/linux-gpio/cover/20171113012523.2328-1-andre.przywara@arm.com/
    [2] https://linux-sunxi.org/Xunlong_Orange_Pi_Zero2
    [3] https://github.com/jernejsk/u-boot/commits/h616-v1
    [4] https://github.com/apritzel/arm-trusted-firmware/commits/h616-WIP

    Changelog v1 .. v2:
    - pinctrl: adjust irq bank map to cover undocumented GPIO bank IRQs
    - use differing h_i2s0 pin output names
    - r-ccu: fix number of used clocks
    - ccu: remove PLL-PERIPHy(4X)
    - ccu: fix gpu1 divider range
    - ccu: fix usb-phy3 parent
    - ccu: add missing TV clocks
    - ccu: rework to CLK_OF_DECLARE style
    - ccu: enable output bit for PLL clocks
    - ccu: renumber clocks
    - .dtsi: drop sun50i-a64-system-control fallback
    - .dtsi: drop unknown SRAM regions
    - .dtsi: add more (undocumented) GPIO interrupts
    - .dtsi: fix I2C3 pin names
    - .dtsi: use a100-emmc fallback for MMC2
    - .dtsi: add second EMAC controller
    - .dtsi: use H3 MUSB controller fallback
    - .dtsi: fix frame size for USB PHY PMU registers
    - .dtsi: add USB0 PHY references
    - .dtsi: fix IR controller clock source
    - .dts: fix LED naming and swap pins
    - .dts: use 5V supply parent for USB supply
    - .dts: drop dummy IRQ for AXP
    - .dts: enable 3V3 header pin power rail
    - .dts: add SPI flash node
    - .dts: make USB-C port peripheral only
    - add IRQ-less AXP support
    - add two patches to support more than one EMAC clock
    - add patch to rework and extend USB PHY support
    - add DT binding documentation patches

    Andre Przywara (18):
    clk: sunxi-ng: h6: Fix clock divider range on some clocks
    dt-bindings: pinctrl: Add Allwinner H616 compatible strings
    pinctrl: sunxi: Add support for the Allwinner H616 pin controller
    pinctrl: sunxi: Add support for the Allwinner H616-R pin controller
    dt-bindings: clk: sunxi-ccu: Add compatible string for Allwinner H616
    clk: sunxi-ng: Add support for the Allwinner H616 R-CCU
    clk: sunxi-ng: Add support for the Allwinner H616 CCU
    mfd: axp20x: Allow AXP chips without interrupt lines
    dt-bindings: sram: sunxi-sram: Add H616 compatible string
    soc: sunxi: sram: Add support for more than one EMAC clock
    net: stmmac: dwmac-sun8i: Prepare for second EMAC clock register
    phy: sun4i-usb: Rework "pmu_unk1" handling
    phy: sun4i-usb: Add support for the H616 USB PHY
    dt-bindings: watchdog: sun4i: Add H616 compatible string
    dt-bindings: allwinner: Add H616 compatible strings
    arm64: dts: allwinner: Add Allwinner H616 .dtsi file
    dt-bindings: arm: sunxi: Add OrangePi Zero 2 binding
    arm64: dts: allwinner: Add OrangePi Zero 2 .dts

    Yangtao Li (3):
    dt-bindings: mmc: sunxi: Add Allwinner A100 and H616 compatibles
    mmc: sunxi: add support for A100 mmc controller
    dt-bindings: watchdog: sun4i: Add A100 compatible

    .../devicetree/bindings/arm/sunxi.yaml | 5 +
    .../clock/allwinner,sun4i-a10-ccu.yaml | 2 +
    .../bindings/i2c/marvell,mv64xxx-i2c.yaml | 21 +-
    .../media/allwinner,sun4i-a10-ir.yaml | 16 +-
    .../bindings/mmc/allwinner,sun4i-a10-mmc.yaml | 8 +
    .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 2 +
    .../bindings/rtc/allwinner,sun6i-a31-rtc.yaml | 3 +
    .../bindings/spi/allwinner,sun6i-a31-spi.yaml | 1 +
    .../allwinner,sun4i-a10-system-control.yaml | 1 +
    .../watchdog/allwinner,sun4i-a10-wdt.yaml | 9 +-
    arch/arm64/boot/dts/allwinner/Makefile | 1 +
    .../allwinner/sun50i-h616-orangepi-zero2.dts | 240 ++++
    .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 715 ++++++++++
    drivers/clk/sunxi-ng/Kconfig | 7 +-
    drivers/clk/sunxi-ng/Makefile | 1 +
    drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 47 +-
    drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h | 3 +-
    drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 8 +-
    drivers/clk/sunxi-ng/ccu-sun50i-h616.c | 1150 +++++++++++++++++
    drivers/clk/sunxi-ng/ccu-sun50i-h616.h | 56 +
    drivers/mfd/axp20x.c | 17 +-
    drivers/mmc/host/sunxi-mmc.c | 28 +-
    .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 12 +-
    drivers/phy/allwinner/phy-sun4i-usb.c | 39 +-
    drivers/pinctrl/sunxi/Kconfig | 10 +
    drivers/pinctrl/sunxi/Makefile | 2 +
    drivers/pinctrl/sunxi/pinctrl-sun50i-h616-r.c | 54 +
    drivers/pinctrl/sunxi/pinctrl-sun50i-h616.c | 548 ++++++++
    drivers/soc/sunxi/sunxi_sram.c | 31 +-
    include/dt-bindings/clock/sun50i-h616-ccu.h | 115 ++
    include/dt-bindings/reset/sun50i-h616-ccu.h | 70 +
    31 files changed, 3151 insertions(+), 71 deletions(-)
    create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
    create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
    create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h616.c
    create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h616.h
    create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-h616-r.c
    create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-h616.c
    create mode 100644 include/dt-bindings/clock/sun50i-h616-ccu.h
    create mode 100644 include/dt-bindings/reset/sun50i-h616-ccu.h

    --
    2.17.5

    \
     
     \ /
      Last update: 2020-12-11 02:24    [W:6.765 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site