lkml.org 
[lkml]   [2020]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] clk: qcom: gcc-sc7180: Use floor ops for sdcc clks
From
Date
Quoting Douglas Anderson (2020-12-10 10:22:38)
> I would repeat the same commit message that was in commit 5e4b7e82d497
> ("clk: qcom: gcc-sdm845: Use floor ops for sdcc clks") but it seems
> silly to do so when you could just go read that commit.
>
> NOTE: this is actually extra terrible because we're missing the 50 MHz
> rate in the table (see the next patch AKA ("clk: qcom: gcc-sc7180: Add
> 50 MHz clock rate for SDC2")). That means then when you run an older
> SD card it'll try to clock it at 100 MHz when it's only specced to run
> at 50 MHz max. As you can probably guess that doesn't work super
> well.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
> ---

Applied to clk-next

\
 
 \ /
  Last update: 2020-12-10 21:30    [W:1.973 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site