lkml.org 
[lkml]   [2020]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/6] arm64: dts: imx8mq: Add interconnect for lcdif
From
Date
Am Dienstag, den 01.12.2020, 11:01 +0100 schrieb Martin Kepplinger:
> Add interconnect ports for lcdif to set bus capabilities.
>
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 244e28e54b35..7384a69ed36c 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -11,6 +11,7 @@
>  #include "dt-bindings/input/input.h"
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/interconnect/imx8mq.h>
>  #include "imx8mq-pinfunc.h"
>  
>
>
>
>  / {
> @@ -522,6 +523,8 @@
>   <&clk IMX8MQ_VIDEO_PLL1>,
>   <&clk IMX8MQ_VIDEO_PLL1_OUT>;
>   assigned-clock-rates = <0>, <0>, <0>, <594000000>;
> + interconnects = <&noc IMX8MQ_ICM_LCDIF &noc IMX8MQ_ICS_DRAM>;
> + interconnect-names = "lcdif-dram";

This needs to be documented in the binding. Also I would argue that you
can drop the lcdif prefix in the name, as it's part of the lcdif DT
node.

Regards,
Lucas

>   status = "disabled";
>  
>
>
>
>   port@0 {


\
 
 \ /
  Last update: 2020-12-01 12:29    [W:0.078 / U:5.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site