lkml.org 
[lkml]   [2020]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH v2 2/3] usb: typec: tcpci: Add support to report vSafe0V
From
This change adds vbus_vsafe0v which when set, makes TCPM
query for VSAFE0V by assigning the tcpc.is_vbus_vsafe0v callback.
Also enables ALERT.ExtendedStatus which is triggered when
status of EXTENDED_STATUS.vSafe0V changes.
EXTENDED_STATUS.vSafe0V is set when vbus is at vSafe0V and
cleared otherwise.

Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
---
Changes since v1:
- Removed logic for checking TCPC_POWER_STATUS_MASK reg
read in the irq handler. Sending that as a separate patch.
---
drivers/usb/typec/tcpm/tcpci.c | 39 +++++++++++++++++++++++++++++-----
drivers/usb/typec/tcpm/tcpci.h | 6 ++++++
2 files changed, 40 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index 12d983a75510..f938d9876ce9 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -402,6 +402,19 @@ static int tcpci_get_vbus(struct tcpc_dev *tcpc)
return !!(reg & TCPC_POWER_STATUS_VBUS_PRES);
}

+static bool tcpci_is_vbus_vsafe0v(struct tcpc_dev *tcpc)
+{
+ struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(tcpci->regmap, TCPC_EXTENDED_STATUS, &reg);
+ if (ret < 0)
+ return false;
+
+ return !!(reg & TCPC_EXTENDED_STATUS_VSAFE0V);
+}
+
static int tcpci_set_vbus(struct tcpc_dev *tcpc, bool source, bool sink)
{
struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
@@ -554,12 +567,22 @@ static int tcpci_init(struct tcpc_dev *tcpc)
TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_CC_STATUS;
if (tcpci->controls_vbus)
reg |= TCPC_ALERT_POWER_STATUS;
+ /* Enable VSAFE0V status interrupt when detecting VSAFE0V is supported */
+ if (tcpci->data->vbus_vsafe0v) {
+ reg |= TCPC_ALERT_EXTENDED_STATUS;
+ ret = regmap_write(tcpci->regmap, TCPC_EXTENDED_STATUS_MASK,
+ TCPC_EXTENDED_STATUS_VSAFE0V);
+ if (ret < 0)
+ return ret;
+ }
return tcpci_write16(tcpci, TCPC_ALERT_MASK, reg);
}

irqreturn_t tcpci_irq(struct tcpci *tcpci)
{
u16 status;
+ int ret;
+ unsigned int raw;

tcpci_read16(tcpci, TCPC_ALERT, &status);

@@ -575,15 +598,12 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci)
tcpm_cc_change(tcpci->port);

if (status & TCPC_ALERT_POWER_STATUS) {
- unsigned int reg;
-
- regmap_read(tcpci->regmap, TCPC_POWER_STATUS_MASK, &reg);
-
+ regmap_read(tcpci->regmap, TCPC_POWER_STATUS_MASK, &raw);
/*
* If power status mask has been reset, then the TCPC
* has reset.
*/
- if (reg == 0xff)
+ if (raw == 0xff)
tcpm_tcpc_reset(tcpci->port);
else
tcpm_vbus_change(tcpci->port);
@@ -622,6 +642,12 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci)
tcpm_pd_receive(tcpci->port, &msg);
}

+ if (status & TCPC_ALERT_EXTENDED_STATUS) {
+ ret = regmap_read(tcpci->regmap, TCPC_EXTENDED_STATUS, &raw);
+ if (!ret && (raw & TCPC_EXTENDED_STATUS_VSAFE0V))
+ tcpm_vbus_change(tcpci->port);
+ }
+
if (status & TCPC_ALERT_RX_HARD_RST)
tcpm_pd_hard_reset(tcpci->port);

@@ -699,6 +725,9 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data)
tcpci_set_auto_vbus_discharge_threshold;
}

+ if (tcpci->data->vbus_vsafe0v)
+ tcpci->tcpc.is_vbus_vsafe0v = tcpci_is_vbus_vsafe0v;
+
err = tcpci_parse_config(tcpci);
if (err < 0)
return ERR_PTR(err);
diff --git a/drivers/usb/typec/tcpm/tcpci.h b/drivers/usb/typec/tcpm/tcpci.h
index 3fe313655f0c..116a69c85e38 100644
--- a/drivers/usb/typec/tcpm/tcpci.h
+++ b/drivers/usb/typec/tcpm/tcpci.h
@@ -49,6 +49,9 @@
#define TCPC_TCPC_CTRL_ORIENTATION BIT(0)
#define TCPC_TCPC_CTRL_BIST_TM BIT(1)

+#define TCPC_EXTENDED_STATUS 0x20
+#define TCPC_EXTENDED_STATUS_VSAFE0V BIT(0)
+
#define TCPC_ROLE_CTRL 0x1a
#define TCPC_ROLE_CTRL_DRP BIT(6)
#define TCPC_ROLE_CTRL_RP_VAL_SHIFT 4
@@ -155,11 +158,14 @@ struct tcpci;
* is sourcing vbus.
* @auto_discharge_disconnect:
* Optional; Enables TCPC to autonously discharge vbus on disconnect.
+ * @vbus_vsafe0v:
+ * optional; Set when TCPC can detect whether vbus is at VSAFE0V.
*/
struct tcpci_data {
struct regmap *regmap;
unsigned char TX_BUF_BYTE_x_hidden:1;
unsigned char auto_discharge_disconnect:1;
+ unsigned char vbus_vsafe0v:1;

int (*init)(struct tcpci *tcpci, struct tcpci_data *data);
int (*set_vconn)(struct tcpci *tcpci, struct tcpci_data *data,
--
2.29.2.576.ga3fc446d84-goog
\
 
 \ /
  Last update: 2020-12-02 05:12    [W:0.124 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site