lkml.org 
[lkml]   [2020]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 6/7] arm64: tegra: Add QSPI nodes on Tegra194
Date
Tegra194 has 2 QSPI controllers.

This patch adds DT node for these 2 QSPI controllers.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 6946fb2..3049985 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -609,6 +609,32 @@
status = "disabled";
};

+ spi@3270000 {
+ compatible = "nvidia,tegra194-qspi";
+ reg = <0x3270000 0x1000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bpmp TEGRA194_CLK_QSPI0>;
+ clock-names = "qspi";
+ resets = <&bpmp TEGRA194_RESET_QSPI0>;
+ reset-names = "qspi";
+ status = "disabled";
+ };
+
+ spi@3300000 {
+ compatible = "nvidia,tegra194-qspi";
+ reg = <0x3300000 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bpmp TEGRA194_CLK_QSPI1>;
+ clock-names = "qspi";
+ resets = <&bpmp TEGRA194_RESET_QSPI1>;
+ reset-names = "qspi";
+ status = "disabled";
+ };
+
pwm1: pwm@3280000 {
compatible = "nvidia,tegra194-pwm",
"nvidia,tegra186-pwm";
--
2.7.4
\
 
 \ /
  Last update: 2020-12-01 22:15    [W:0.286 / U:0.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site