lkml.org 
[lkml]   [2020]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 net-next 1/4] dt-bindings: net: nfc: s3fwrn5: Support a UART interface
Date
From: Bongsu Jeon <bongsu.jeon@samsung.com>

Since S3FWRN82 NFC Chip, The UART interface can be used.
S3FWRN82 supports I2C and UART interface.

Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
---
.../bindings/net/nfc/samsung,s3fwrn5.yaml | 32 ++++++++++++++++++++--
1 file changed, 29 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
index cb0b8a5..cc5f9a1 100644
--- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -12,7 +12,10 @@ maintainers:

properties:
compatible:
- const: samsung,s3fwrn5-i2c
+ items:
+ - enum:
+ - samsung,s3fwrn5-i2c
+ - samsung,s3fwrn82

en-gpios:
maxItems: 1
@@ -47,10 +50,19 @@ additionalProperties: false
required:
- compatible
- en-gpios
- - interrupts
- - reg
- wake-gpios

+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,s3fwrn5-i2c
+ then:
+ required:
+ - interrupts
+ - reg
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
@@ -71,3 +83,17 @@ examples:
wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
};
};
+ # UART example on Raspberry Pi
+ - |
+ uart0 {
+ status = "okay";
+
+ nfc {
+ compatible = "samsung,s3fwrn82";
+
+ en-gpios = <&gpio 20 0>;
+ wake-gpios = <&gpio 16 0>;
+
+ status = "okay";
+ };
+ };
--
1.9.1
\
 
 \ /
  Last update: 2020-12-01 14:52    [W:0.061 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site