lkml.org 
[lkml]   [2020]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v12 4/4] gpio: xilinx: Utilize generic bitmap_get_value and _set_value
On Mon, Nov 09, 2020 at 06:04:11PM +0530, Syed Nayyar Waris wrote:
> On Sun, Nov 01, 2020 at 09:08:29PM +0100, Arnd Bergmann wrote:
> > On Sun, Nov 1, 2020 at 4:00 PM William Breathitt Gray
> > <vilhelm.gray@gmail.com> wrote:
> > >
> > > On Thu, Oct 29, 2020 at 11:44:47PM +0100, Arnd Bergmann wrote:
> > > > On Sun, Oct 18, 2020 at 11:44 PM Syed Nayyar Waris <syednwaris@gmail.com> wrote:
> > > > >
> > > > > This patch reimplements the xgpio_set_multiple() function in
> > > > > drivers/gpio/gpio-xilinx.c to use the new generic functions:
> > > > > bitmap_get_value() and bitmap_set_value(). The code is now simpler
> > > > > to read and understand. Moreover, instead of looping for each bit
> > > > > in xgpio_set_multiple() function, now we can check each channel at
> > > > > a time and save cycles.
> > > >
> > > > This now causes -Wtype-limits warnings in linux-next with gcc-10:
> > >
> > > Hi Arnd,
> > >
> > > What version of gcc-10 are you running? I'm having trouble generating
> > > these warnings so I suspect I'm using a different version than you.
> >
> > I originally saw it with the binaries from
> > https://mirrors.edge.kernel.org/pub/tools/crosstool/, but I have
> > also been able to reproduce it with a minimal test case on the
> > binaries from godbolt.org, see https://godbolt.org/z/Wq8q4n
> >
> > > Let me first verify that I understand the problem correctly. The issue
> > > is the possibility of a stack smash in bitmap_set_value() when the value
> > > of start + nbits is larger than the length of the map bitmap memory
> > > region. This is because index (or index + 1) could be outside the range
> > > of the bitmap memory region passed in as map. Is my understanding
> > > correct here?
> >
> > Yes, that seems to be the case here.
> >
> > > In xgpio_set_multiple(), the variables width[0] and width[1] serve as
> > > possible start and nbits values for the bitmap_set_value() calls.
> > > Because width[0] and width[1] are unsigned int variables, GCC considers
> > > the possibility that the value of width[0]/width[1] might exceed the
> > > length of the bitmap memory region named old and thus result in a stack
> > > smash.
> > >
> > > I don't know if invalid width values are actually possible for the
> > > Xilinx gpio device, but let's err on the side of safety and assume this
> > > is actually a possibility. We should verify that the combined value of
> > > gpio_width[0] + gpio_width[1] does not exceed 64 bits; we can add a
> > > check for this in xgpio_probe() when we grab the gpio_width values.
> > >
> > > However, we're still left with the GCC warnings because GCC is not smart
> > > enough to know that we've already checked the boundary and width[0] and
> > > width[1] are valid values. I suspect we can avoid this warning is we
> > > refactor bitmap_set_value() to increment map seperately and then set it:
> >
> > As I understand it, part of the problem is that gcc sees the possible
> > range as being constrained by the operations on 'start' and 'nbits',
> > in particular the shift in BIT_WORD() that put an upper bound on
> > the index, but then it sees that the upper bound is higher than the
> > upper bound of the array, i.e. element zero.
> >
> > I added a check
> >
> > if (start >= 64 || start + size >= 64) return;
> >
> > in the godbolt.org testcase, which does help limit the start
> > index appropriately, but it is not sufficient to let the compiler
> > see that the 'if (space >= nbits) ' condition is guaranteed to
> > be true for all values here.
> >
> > > static inline void bitmap_set_value(unsigned long *map,
> > > unsigned long value,
> > > unsigned long start, unsigned long nbits)
> > > {
> > > const unsigned long offset = start % BITS_PER_LONG;
> > > const unsigned long ceiling = round_up(start + 1, BITS_PER_LONG);
> > > const unsigned long space = ceiling - start;
> > >
> > > map += BIT_WORD(start);
> > > value &= GENMASK(nbits - 1, 0);
> > >
> > > if (space >= nbits) {
> > > *map &= ~(GENMASK(nbits - 1, 0) << offset);
> > > *map |= value << offset;
> > > } else {
> > > *map &= ~BITMAP_FIRST_WORD_MASK(start);
> > > *map |= value << offset;
> > > map++;
> > > *map &= ~BITMAP_LAST_WORD_MASK(start + nbits);
> > > *map |= value >> space;
> > > }
> > > }
> > >
> > > This avoids adding a costly conditional check inside bitmap_set_value()
> > > when almost all bitmap_set_value() calls will have static arguments with
> > > well-defined and obvious boundaries.
> > >
> > > Do you think this would be an acceptable solution to resolve your GCC
> > > warnings?
> >
> > Unfortunately, it does not seem to make a difference, as gcc still
> > knows that this compiles to the same result, and it produces the same
> > warning as before (see https://godbolt.org/z/rjx34r)
> >
> > Arnd
>
> Hi Arnd,
>
> Sharing a different version of bitmap_set_valuei() function. See below.
>
> Let me know if the below solution looks good to you and if it resolves
> the above compiler warning.
>
>
> @@ -1,5 +1,5 @@
> static inline void bitmap_set_value(unsigned long *map,
> - unsigned long value,
> + unsigned long value, const size_t length,
> unsigned long start, unsigned long nbits)
> {
> const size_t index = BIT_WORD(start);
> @@ -7,6 +7,9 @@ static inline void bitmap_set_value(unsigned long *map,
> const unsigned long ceiling = round_up(start + 1, BITS_PER_LONG);
> const unsigned long space = ceiling - start;
>
> + if (index >= length)
> + return;
> +
> value &= GENMASK(nbits - 1, 0);
>
> if (space >= nbits) {
> @@ -15,6 +18,10 @@ static inline void bitmap_set_value(unsigned long *map,
> } else {
> map[index + 0] &= ~BITMAP_FIRST_WORD_MASK(start);
> map[index + 0] |= value << offset;
> +
> + if (index + 1 >= length)
> + return;
> +
> map[index + 1] &= ~BITMAP_LAST_WORD_MASK(start + nbits);
> map[index + 1] |= value >> space;
> }

One of my concerns is that we're incurring the latency two additional
conditional checks just to suppress a compiler warning about a case that
wouldn't occur in the actual use of bitmap_set_value(). I'm hoping
there's a way for us to suppress these warnings without adding onto the
latency of this function; given that bitmap_set_value() is intended to
be used in loops, conditionals here could significantly increase latency
in drivers.

I wonder if array_index_nospec() might have the side effect of
suppressing these warnings for us. For example, would this work:

static inline void bitmap_set_value(unsigned long *map,
unsigned long value,
unsigned long start, unsigned long nbits)
{
const unsigned long offset = start % BITS_PER_LONG;
const unsigned long ceiling = round_up(start + 1, BITS_PER_LONG);
const unsigned long space = ceiling - start;
size_t index = BIT_WORD(start);

value &= GENMASK(nbits - 1, 0);

if (space >= nbits) {
index = array_index_nospec(index, index + 1);

map[index] &= ~(GENMASK(nbits - 1, 0) << offset);
map[index] |= value << offset;
} else {
index = array_index_nospec(index, index + 2);

map[index + 0] &= ~BITMAP_FIRST_WORD_MASK(start);
map[index + 0] |= value << offset;
map[index + 1] &= ~BITMAP_LAST_WORD_MASK(start + nbits);
map[index + 1] |= value >> space;
}
}

Or is this going to produce the same warning because we're not using an
explicit check against the map array size?

William Breathitt Gray
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-11-09 14:42    [W:0.105 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site