lkml.org 
[lkml]   [2020]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] ARM: dts: imx50-kobo-aura: Enable eKTF2132 touchscreen
On Fri, Nov 06, 2020 at 12:24:12PM +0100, Jonathan Neuschäfer wrote:
> The Kobo Aura has an eKTF2132 touchscreen controller.
>
> Although the vendor kernel toggles a reset pin (GPIO5-12) during the
> startup sequence, the touchscreen works without it.
>
> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
> ---
>
> This patch requires "[PATCH] ARM: dts: imx50-kobo-aura: Add 'grp' suffix
> to pinctrl node names" in order to apply cleanly.
> (https://lore.kernel.org/lkml/20201031210729.2804471-1-j.neuschaefer@gmx.net/)
> ---
> arch/arm/boot/dts/imx50-kobo-aura.dts | 16 +++++++++++++++-
> 1 file changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts
> index b2fbee60271f2..82ce8c43be867 100644
> --- a/arch/arm/boot/dts/imx50-kobo-aura.dts
> +++ b/arch/arm/boot/dts/imx50-kobo-aura.dts
> @@ -120,7 +120,14 @@ &i2c1 {
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> - /* TODO: ektf2132 touch controller at 0x15 */
> + touchscreen@15 {
> + reg = <0x15>;
> + compatible = "elan,ektf2132";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ts>;
> + power-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
> + interrupts-extended = <&gpio5 13 IRQ_TYPE_EDGE_FALLING>;

It needs include of <dt-bindings/interrupt-controller/irq.h>.

DTC arch/arm/boot/dts/imx50-kobo-aura.dtb
Error: ../arch/arm/boot/dts/imx50-kobo-aura.dts:128.36-37 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:326: recipe for target 'arch/arm/boot/dts/imx50-kobo-aura.dtb' failed
make[2]: *** [arch/arm/boot/dts/imx50-kobo-aura.dtb] Error 1

Patch dropped.

Shawn

> + };
> };
>
> &i2c2 {
> @@ -240,6 +247,13 @@ MX50_PAD_SD3_D7__ESDHC3_DAT7 0x1d4
> >;
> };
>
> + pinctrl_ts: tsgrp {
> + fsl,pins = <
> + MX50_PAD_CSPI_MOSI__GPIO4_9 0x0
> + MX50_PAD_SD2_D5__GPIO5_13 0x0
> + >;
> + };
> +
> pinctrl_uart2: uart2grp {
> fsl,pins = <
> MX50_PAD_UART2_TXD__UART2_TXD_MUX 0x1e4
> --
> 2.28.0
>

\
 
 \ /
  Last update: 2020-11-10 04:13    [W:0.676 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site