lkml.org 
[lkml]   [2020]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/4] drm/bridge: ti-sn65dsi86: Support EDID reading
Hi Stephen

On Mon, Nov 02, 2020 at 10:11:40AM -0800, Stephen Boyd wrote:
> This patch series cleans up the DDC code a little bit so that
> it is more efficient time wise and supports grabbing the EDID
> of the eDP panel over the aux channel. I timed this on a board
> I have on my desk and it takes about 20ms to grab the EDID out
> of the panel and make sure it is valid.
>
> The first two patches seem less controversial so I stuck them at
> the beginning. The third patch does the EDID reading and caches
> it so we don't have to keep grabbing it over and over again. And
> finally the last patch updates the reply field so that short
> reads and nacks over the channel are reflected properly instead of
> treating them as some sort of error that can't be discerned.
>
> Stephen Boyd (4):
> drm/bridge: ti-sn65dsi86: Combine register accesses in
> ti_sn_aux_transfer()
> drm/bridge: ti-sn65dsi86: Make polling a busy loop
> drm/bridge: ti-sn65dsi86: Read EDID blob over DDC
> drm/bridge: ti-sn65dsi86: Update reply on aux failures

All applied to drm-misc-next, thanks,

Sam

\
 
 \ /
  Last update: 2020-11-07 12:10    [W:0.065 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site