lkml.org 
[lkml]   [2020]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/6] usb: pd: Add captive Type C cable type
Date
The USB Power Delivery Specification R3.0 adds a captive cable type
to the "USB Type-C plug to USB Type-C/Captive" field (Bits 19-18,
Passive/Active Cable VDO, Table 6-38 & 6-39).

Add the corresponding definition to the Cable VDO header. Also add a
helper macro to get the Type C cable connector type, when provided
the cable VDO.

Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
---

Changes in v2:
- No changes.

include/linux/usb/pd_vdo.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/include/linux/usb/pd_vdo.h b/include/linux/usb/pd_vdo.h
index 68bdc4e2f5a9..8c5cb5830754 100644
--- a/include/linux/usb/pd_vdo.h
+++ b/include/linux/usb/pd_vdo.h
@@ -177,7 +177,7 @@
* <31:28> :: Cable HW version
* <27:24> :: Cable FW version
* <23:20> :: Reserved, Shall be set to zero
- * <19:18> :: type-C to Type-A/B/C (00b == A, 01 == B, 10 == C)
+ * <19:18> :: type-C to Type-A/B/C/Captive (00b == A, 01 == B, 10 == C, 11 == Captive)
* <17> :: Type-C to Plug/Receptacle (0b == plug, 1b == receptacle)
* <16:13> :: cable latency (0001 == <10ns(~1m length))
* <12:11> :: cable termination type (11b == both ends active VCONN req)
@@ -193,6 +193,7 @@
#define CABLE_ATYPE 0
#define CABLE_BTYPE 1
#define CABLE_CTYPE 2
+#define CABLE_CAPTIVE 3
#define CABLE_PLUG 0
#define CABLE_RECEPTACLE 1
#define CABLE_CURR_1A5 0
@@ -208,6 +209,7 @@
| (tx1d) << 10 | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7 \
| ((cur) & 0x3) << 5 | (vps) << 4 | (sopp) << 3 \
| ((usbss) & 0x7))
+#define VDO_TYPEC_CABLE_TYPE(vdo) (((vdo) >> 18) & 0x3)

/*
* AMA VDO
--
2.29.1.341.ge80a0c044ae-goog
\
 
 \ /
  Last update: 2020-11-06 19:42    [W:0.081 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site