Messages in this thread | | | From | Atish Patra <> | Date | Thu, 5 Nov 2020 23:37:45 -0800 | Subject | Re: [RFC PATCH 0/3] Add Microchip PolarFire Soc Support |
| |
On Thu, Nov 5, 2020 at 11:14 PM Palmer Dabbelt <palmer@dabbelt.com> wrote: > > On Wed, 28 Oct 2020 16:27:56 PDT (-0700), Atish Patra wrote: > > This series adds minimal support for Microchip Polar Fire Soc Icicle kit. > > It is rebased on v5.10-rc1 and depends on clock support. > > Only MMC and ethernet drivers are enabled via this series. > > The idea here is to add the foundational patches so that other drivers > > can be added to on top of this. > > > > This series has been tested on Qemu and Polar Fire Soc Icicle kit. > > The following qemu series is necessary to test it on Qemu. > > > > The series can also be found at the following github repo. > > > > I noticed the latest version of mmc driver[2] hangs on the board with > > the latest clock driver. That's why, I have tested with the old clock > > driver available in the above github repo. > > OK, I guess that's why it's an RFC? >
Yes. The latest clock/pcie driver did not work for me. I might have missed something in DT. The idea for RFC is so that anybody who wants to try the latest kernel on a polarfire board has a meaningful way to test it.
> > [1] https://lists.nongnu.org/archive/html/qemu-devel/2020-10/msg08582.html > > [2] https://www.spinics.net/lists/devicetree/msg383626.html > > Looks like this one hasn't been merged yet. IDK if something is broken with my > mail client but I'm not seeing any github repos. If this depends on > not-yet-merged drivers then it's certainly RFC material, but aside from the DT > stuff (which should be straight-forward) it seems fine to me. >
I think it makes sense to take this series once the clock driver is merged at least.
> Since you posted this an an RFC I'm going to assume you're going to re-spin it. >
Yes. There are some feedbacks on DT which I will fix in v2.
> Thanks! > > > > > Atish Patra (3): > > RISC-V: Add Microchip PolarFire SoC kconfig option > > RISC-V: Initial DTS for Microchip ICICLE board > > RISC-V: Enable Microchip PolarFire ICICLE SoC > > > > arch/riscv/Kconfig.socs | 7 + > > arch/riscv/boot/dts/Makefile | 1 + > > arch/riscv/boot/dts/microchip/Makefile | 2 + > > .../microchip/microchip-icicle-kit-a000.dts | 313 ++++++++++++++++++ > > arch/riscv/configs/defconfig | 4 + > > 5 files changed, 327 insertions(+) > > create mode 100644 arch/riscv/boot/dts/microchip/Makefile > > create mode 100644 arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > > _______________________________________________ > linux-riscv mailing list > linux-riscv@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-riscv
-- Regards, Atish
| |