lkml.org 
[lkml]   [2020]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 7/7] rcu/segcblist: Add additional comments to explain smp_mb()
On Thu, Nov 05, 2020 at 10:55:51AM -0800, Paul E. McKenney wrote:
> On Tue, Nov 03, 2020 at 09:26:03AM -0500, Joel Fernandes (Google) wrote:
> > Memory barriers are needed when updating the full length of the
> > segcblist, however it is not fully clearly why one is needed before and
> > after. This patch therefore adds additional comments to the function
> > header to explain it.
> >
> > Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
>
> Looks good, thank you! As always, I could not resist the urge to
> do a bit of wordsmithing, so that the queued commit is as shown
> below. Please let me know if I messed anything up.

> Thanx, Paul
>
> ------------------------------------------------------------------------
>
> commit 7dac7adefcae7558b3a85a16f51186d621623733
> Author: Joel Fernandes (Google) <joel@joelfernandes.org>
> Date: Tue Nov 3 09:26:03 2020 -0500
>
> rcu/segcblist: Add additional comments to explain smp_mb()
>
> One counter-intuitive property of RCU is the fact that full memory
> barriers are needed both before and after updates to the full
> (non-segmented) length. This patch therefore helps to assist the
> reader's intuition by adding appropriate comments.
>
> [ paulmck: Wordsmithing. ]
> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
>
> diff --git a/kernel/rcu/rcu_segcblist.c b/kernel/rcu/rcu_segcblist.c
> index bb246d8..b6dda7c 100644
> --- a/kernel/rcu/rcu_segcblist.c
> +++ b/kernel/rcu/rcu_segcblist.c
> @@ -94,17 +94,77 @@ static void rcu_segcblist_set_len(struct rcu_segcblist *rsclp, long v)
> * field to disagree with the actual number of callbacks on the structure.
> * This increase is fully ordered with respect to the callers accesses
> * both before and after.
> + *
> + * So why on earth is a memory barrier required both before and after
> + * the update to the ->len field???
> + *
> + * The reason is that rcu_barrier() locklessly samples each CPU's ->len
> + * field, and if a given CPU's field is zero, avoids IPIing that CPU.
> + * This can of course race with both queuing and invoking of callbacks.
> + * Failng to correctly handle either of these races could result in
> + * rcu_barrier() failing to IPI a CPU that actually had callbacks queued
> + * which rcu_barrier() was obligated to wait on. And if rcu_barrier()
> + * failed to wait on such a callback, unloading certain kernel modules
> + * would result in calls to functions whose code was no longer present in
> + * the kernel, for but one example.
> + *
> + * Therefore, ->len transitions from 1->0 and 0->1 have to be carefully
> + * ordered with respect with both list modifications and the rcu_barrier().
> + *
> + * The queuing case is CASE 1 and the invoking case is CASE 2.
> + *
> + * CASE 1: Suppose that CPU 0 has no callbacks queued, but invokes
> + * call_rcu() just as CPU 1 invokes rcu_barrier(). CPU 0's ->len field
> + * will transition from 0->1, which is one of the transitions that must be
> + * handled carefully. Without the full memory barriers before the ->len
> + * update and at the beginning of rcu_barrier(), the following could happen:
> + *
> + * CPU 0 CPU 1
> + *
> + * call_rcu().
> + * rcu_barrier() sees ->len as 0.
> + * set ->len = 1.
> + * rcu_barrier() does nothing.
> + * module is unloaded.
> + * callback invokes unloaded function!
> + *
> + * With the full barriers, any case where rcu_barrier() sees ->len as 0 will
> + * have unambiguously preceded the return from the racing call_rcu(), which
> + * means that this call_rcu() invocation is OK to not wait on. After all,
> + * you are supposed to make sure that any problematic call_rcu() invocations
> + * happen before the rcu_barrier().

Unfortunately, I did not understand your explanation. To me the barrier
*before* the setting of length is needed on CPU0 only for 1->0 transition
(Dequeue). Where as in
your example above, it is for enqueue.

This was case 1 in my patch:

+ * To illustrate the problematic scenario to avoid:
+ * P0 (what P1 sees) P1
+ * set len = 0
+ * rcu_barrier sees len as 0
+ * dequeue from list
+ * rcu_barrier does nothing.
+ *


Here, P1 should see the transition of 1->0 *after* the CB is dequeued. Which
means you needed a memory barrier *before* the setting of len from 1->0 and
*after* the dequeue. IOW, rcu_barrier should 'see' the memory ordering as:

1. dequeue
2. set len from 1 -> 0.

For the enqueue case, it is the reverse, rcu_barrier should see:
1. set len from 0 -> 1
2. enqueue

Either way, the point I think I was trying to make is that the length should
always be seen as non-zero if the list is non-empty. Basically, the
rcu_barrier() should always not do the fast-path if the list is non-empty.
Worst-case it might do the slow-path when it is not necessary, but it should
never do the fast-path when it was not supposed to.

Thoughts?

thanks,

- Joel



> + *
> + *
> + * CASE 2: Suppose that CPU 0 is invoking its last callback just as CPU 1 invokes
> + * rcu_barrier(). CPU 0's ->len field will transition from 1->0, which is one
> + * of the transitions that must be handled carefully. Without the full memory
> + * barriers after the ->len update and at the end of rcu_barrier(), the following
> + * could happen:
> + *
> + * CPU 0 CPU 1
> + *
> + * start invoking last callback
> + * set ->len = 0 (reordered)
> + * rcu_barrier() sees ->len as 0
> + * rcu_barrier() does nothing.
> + * module is unloaded
> + * callback executing after unloaded!
> + *
> + * With the full barriers, any case where rcu_barrier() sees ->len as 0
> + * will be fully ordered after the completion of the callback function,
> + * so that the module unloading operation is completely safe.
> + *
> */
> void rcu_segcblist_add_len(struct rcu_segcblist *rsclp, long v)
> {
> #ifdef CONFIG_RCU_NOCB_CPU
> - smp_mb__before_atomic(); /* Up to the caller! */
> + smp_mb__before_atomic(); // Read header comment above.
> atomic_long_add(v, &rsclp->len);
> - smp_mb__after_atomic(); /* Up to the caller! */
> + smp_mb__after_atomic(); // Read header comment above.
> #else
> - smp_mb(); /* Up to the caller! */
> + smp_mb(); // Read header comment above.
> WRITE_ONCE(rsclp->len, rsclp->len + v);
> - smp_mb(); /* Up to the caller! */
> + smp_mb(); // Read header comment above.
> #endif
> }
>

\
 
 \ /
  Last update: 2020-11-06 23:43    [W:0.565 / U:0.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site