lkml.org 
[lkml]   [2020]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: renesas: hihope-rev4: Add a comment explaining switch SW2404 required for audio_clk_b
Date
Switch SW2404 should be at poistion 1 so that clock output from CS2000
is connected to AUDIO_CLKB_A.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
---
arch/arm64/boot/dts/renesas/hihope-rev4.dtsi | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
index 3046c07a288b..929f4a1d3f90 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
@@ -91,7 +91,11 @@
#clock-cells = <1>;
clock-frequency = <12288000 11289600>;

- /* update <audio_clk_b> to <cs2000> */
+ /*
+ * Update <audio_clk_b> to <cs2000>
+ * Switch SW2404 should be at position 1 so that clock from
+ * CS2000 is connected to AUDIO_CLKB_A
+ */
clocks = <&cpg CPG_MOD 1005>,
<&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
<&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
--
2.17.1
\
 
 \ /
  Last update: 2020-11-05 13:12    [W:0.078 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site