lkml.org 
[lkml]   [2020]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 11/14] dt-bindings: media: i2c: Add A83T MIPI CSI-2 bindings documentation
Hi Paul,

On Fri, Oct 23, 2020 at 07:45:43PM +0200, Paul Kocialkowski wrote:
> This introduces YAML bindings documentation for the A83T MIPI CSI-2
> controller.
>
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> ---
> .../media/allwinner,sun8i-a83t-mipi-csi2.yaml | 158 ++++++++++++++++++
> 1 file changed, 158 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml
> new file mode 100644
> index 000000000000..2384ae4e7be0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml
> @@ -0,0 +1,158 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/allwinner,sun8i-a83t-mipi-csi2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Allwinner A83T MIPI CSI-2 Device Tree Bindings
> +
> +maintainers:
> + - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> +
> +properties:
> + compatible:
> + const: allwinner,sun8i-a83t-mipi-csi2
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: Bus Clock
> + - description: Module Clock
> + - description: MIPI-specific Clock
> + - description: Misc CSI Clock
> +
> + clock-names:
> + items:
> + - const: bus
> + - const: mod
> + - const: mipi
> + - const: misc
> +
> + resets:
> + maxItems: 1
> +
> + # See ./video-interfaces.txt for details
> + ports:
> + type: object
> +
> + properties:
> + port@0:
> + type: object
> + description: Input port, connect to a MIPI CSI-2 sensor
> +
> + properties:
> + reg:
> + const: 0
> +
> + endpoint:
> + type: object
> +
> + properties:
> + remote-endpoint: true
> +
> + bus-type:
> + const: 4

Again, if this is D-PHY only, you can remove this.

> +
> + clock-lanes:
> + maxItems: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4

Does the device support lane reordering? If not, you can remove
clock-lanes.

> +
> + required:
> + - bus-type
> + - data-lanes
> + - remote-endpoint
> +
> + additionalProperties: false
> +
> + required:
> + - endpoint
> +
> + additionalProperties: false
> +
> + port@1:
> + type: object
> + description: Output port, connect to a CSI controller
> +
> + properties:
> + reg:
> + const: 1
> +
> + endpoint:
> + type: object
> +
> + properties:
> + remote-endpoint: true
> +
> + bus-type:
> + const: 4

Is it a MIPI CSI-2 D-PHY -> MIPI CSI-2 D-PHY device? I call that "cable".
:-)

> +
> + additionalProperties: false
> +
> + required:
> + - endpoint
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - resets
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/sun8i-a83t-ccu.h>
> + #include <dt-bindings/reset/sun8i-a83t-ccu.h>
> +
> + mipi_csi2: mipi-csi2@1cb1000 {
> + compatible = "allwinner,sun8i-a83t-mipi-csi2";
> + reg = <0x01cb1000 0x1000>;
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_CSI>,
> + <&ccu CLK_CSI_SCLK>,
> + <&ccu CLK_MIPI_CSI>,
> + <&ccu CLK_CSI_MISC>;
> + clock-names = "bus", "mod", "mipi", "misc";
> + resets = <&ccu RST_BUS_CSI>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + mipi_csi2_in: port@0 {
> + reg = <0>;
> +
> + mipi_csi2_in_ov8865: endpoint {
> + bus-type = <4>; /* MIPI CSI-2 D-PHY */
> + clock-lanes = <0>;
> + data-lanes = <1 2 3 4>;
> +
> + remote-endpoint = <&ov8865_out_mipi_csi2>;
> + };
> + };
> +
> + mipi_csi2_out: port@1 {
> + reg = <1>;
> +
> + mipi_csi2_out_csi: endpoint {
> + bus-type = <4>; /* MIPI CSI-2 D-PHY */
> + remote-endpoint = <&csi_in_mipi_csi2>;
> + };
> + };
> + };
> + };
> +
> +...

--
Regards,

Sakari Ailus

\
 
 \ /
  Last update: 2020-11-05 09:49    [W:0.289 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site