lkml.org 
[lkml]   [2020]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v2 04/10] firmware: arm_scmi: Add per message transport data
Date
From: Igor Skalkin <igor.skalkin@opensynergy.com>

The virtio transport in this patch series can be simplified by using the
scmi_xfer tx/rx buffers for data exchange with the virtio device, and
for saving the message state. But the virtio transport requires
prepending a transport-specific header. Also, for data exchange using
virtqueues, the tx and rx buffers should not overlap.

The first step to solve the aforementioned issues is to add a
transport-specific data pointer to scmi_xfer.

Co-developed-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Igor Skalkin <igor.skalkin@opensynergy.com>
---
drivers/firmware/arm_scmi/common.h | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index 9a8359ecd220..c998ec29018e 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -131,6 +131,7 @@ struct scmi_msg {
* buffer for the rx path as we use for the tx path.
* @done: command message transmit completion event
* @async_done: pointer to delayed response message received event completion
+ * @extra_data: Transport-specific private data pointer
*/
struct scmi_xfer {
int transfer_id;
@@ -139,6 +140,7 @@ struct scmi_xfer {
struct scmi_msg rx;
struct completion done;
struct completion *async_done;
+ void *extra_data;
};

void scmi_xfer_put(const struct scmi_handle *h, struct scmi_xfer *xfer);
--
2.25.1
\
 
 \ /
  Last update: 2020-11-05 22:28    [W:0.143 / U:0.984 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site