lkml.org 
[lkml]   [2020]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/3] Add support to handle prefetchable memory
From
Date
Lorenzo / Bjorn,
Could you please review patches-1 & 2 in this series?
For the third patch, we already went with Rob's patch @
http://patchwork.ozlabs.org/project/linux-pci/patch/20201026154852.221483-1-robh@kernel.org/

Thanks,
Vidya Sagar

On 10/26/2020 6:02 PM, Thierry Reding wrote:
> On Sat, Oct 24, 2020 at 04:03:41AM +0000, Jingoo Han wrote:
>> On 10/23/20, 3:57 PM, Vidya Sagar wrote:
>>>
>>> This patch series adds support for configuring the DesignWare IP's ATU
>>> region for prefetchable memory translations.
>>> It first starts by flagging a warning if the size of non-prefetchable
>>> aperture goes beyond 32-bit as PCIe spec doesn't allow it.
>>> And then adds required support for programming the ATU to handle higher
>>> (i.e. >4GB) sizes and then finally adds support for differentiating
>>> between prefetchable and non-prefetchable regions and configuring one of
>>> the ATU regions for prefetchable memory translations purpose.
>>>
>>> Vidya Sagar (3):
>>> PCI: of: Warn if non-prefetchable memory aperture size is > 32-bit
>>> PCI: dwc: Add support to program ATU for >4GB memory aperture sizes
>>> PCI: dwc: Add support to handle prefetchable memory mapping
>>
>> For 2nd & 3rd,
>> Acked-by: Jingoo <jingoohan1@gmail.com>
>> But, I still want someone to ack 1st patch, not me.
>>
>> To Vidya,
>> If possible, can you ask your coworker to give 'Tested-by'? It will be very helpful.
>> Thank you.
>
> On next-20201026 (but also going back quite a while) I'm seeing this
> during boot on Jetson AGX Xavier (Tegra194):
>
> [ 3.493382] ahci 0001:01:00.0: version 3.0
> [ 3.493889] ahci 0001:01:00.0: SSS flag set, parallel bus scan disabled
> [ 4.497706] ahci 0001:01:00.0: controller reset failed (0xffffffff)
> [ 4.498114] ahci: probe of 0001:01:00.0 failed with error -5
>
> After applying this series, AHCI over PCI is back to normal:
>
> [ 3.543230] ahci 0001:01:00.0: AHCI 0001.0000 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
> [ 3.550841] ahci 0001:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
> [ 3.559747] scsi host0: ahci
> [ 3.561998] ata1: SATA max UDMA/133 abar m512@0x1230010000 port 0x1230010100 irq 63
>
> So for the series:
>
> Tested-by: Thierry Reding <treding@nvidia.com>
>

\
 
 \ /
  Last update: 2020-11-04 08:48    [W:0.083 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site