lkml.org 
[lkml]   [2020]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] media: dt-bindings: media: i2c: Add IMX300 CMOS sensor binding
On Thu, Oct 29, 2020 at 06:29:47PM +0100, kholk11@gmail.com wrote:
> From: AngeloGioacchino Del Regno <kholk11@gmail.com>
>
> Add YAML device tree binding for IMX300 CMOS image sensor, and
> the relevant MAINTAINERS entries.
>
> Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
> ---
> .../bindings/media/i2c/sony,imx300.yaml | 112 ++++++++++++++++++
> MAINTAINERS | 7 ++
> 2 files changed, 119 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx300.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx300.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx300.yaml
> new file mode 100644
> index 000000000000..8f1d795f8072
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx300.yaml
> @@ -0,0 +1,112 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/sony,imx300.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sony 1/2.3-Inch 8Mpixel Stacked CMOS Digital Image Sensor
> +
> +maintainers:
> + - AngeloGioacchino Del Regno <kholk11@gmail.com>
> +
> +description: |-
> + The Sony IMX300 is a 1/2.3-inch Stacked CMOS (Exmor-RS) digital image
> + sensor with a pixel size of 1.08um and an active array size of
> + 5948H x 4140V. It is programmable through I2C interface at address 0x10.
> + Image data is sent through MIPI CSI-2, which is configured as either 2 or
> + 4 data lanes.
> +
> +properties:
> + compatible:
> + const: sony,imx300
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + vdig-supply:
> + description:
> + Digital I/O voltage supply, 1.15-1.20 volts
> +
> + vana-supply:
> + description:
> + Analog voltage supply, 2.2 volts
> +
> + vddl-supply:
> + description:
> + Digital core voltage supply, 1.8 volts
> +
> + reset-gpios:

maxItems: 1

> + description: |-
> + Reference to the GPIO connected to the xclr pin, if any.
> + Must be released (set high) after all supplies are applied.
> +
> + # See ../video-interfaces.txt for more details
> + port:
> + type: object
> + properties:
> + endpoint:
> + type: object
> +
> + properties:
> + data-lanes:
> + description: |-
> + The sensor supports either two-lane, or four-lane operation,
> + but the driver currently supports only four-lane.

What the driver is not relevant. Please define all possible
configurations. Or just omit? What's the behavior if omitted?

> + items:
> + - const: 0
> + - const: 1
> + - const: 2
> + - const: 3
> +
> + clock-noncontinuous: true
> +
> + link-frequencies:
> + $ref: /schemas/types.yaml#/definitions/uint64-array
> + description:
> + Allowed data bus frequencies. The driver currently needs
> + to switch between 780000000 and 480000000 Hz in order to
> + guarantee functionality of all modes.
> +
> + required:
> + - link-frequencies
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - vana-supply
> + - vdig-supply
> + - vddl-supply
> + - port
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + imx300: sensor@10 {
> + compatible = "sony,imx300";
> + reg = <0x10>;
> + clocks = <&imx300_xclk>;
> + vana-supply = <&imx300_vana>; /* 2.2v */
> + vdig-supply = <&imx300_vdig>; /* 1.2v */
> + vddl-supply = <&imx300_vddl>; /* 1.8v */
> +
> + port {
> + imx300_0: endpoint {
> + remote-endpoint = <&csi1_ep>;
> + data-lanes = <0 1 2 3>;
> + clock-noncontinuous;
> + link-frequencies = /bits/ 64 <780000000 480000000>;
> + };
> + };
> + };
> + };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index c66710dd7e0a..21ba41db0063 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -16279,6 +16279,13 @@ T: git git://linuxtv.org/media_tree.git
> F: Documentation/devicetree/bindings/media/i2c/imx290.txt
> F: drivers/media/i2c/imx290.c
>
> +SONY IMX300 SENSOR DRIVER
> +M: AngeloGioacchino Del Regno <kholk11@gmail.com>
> +L: linux-media@vger.kernel.org
> +S: Maintained
> +F: Documentation/devicetree/bindings/media/i2c/sony,imx300.yaml
> +F: drivers/media/i2c/imx300.c
> +
> SONY IMX319 SENSOR DRIVER
> M: Bingbu Cao <bingbu.cao@intel.com>
> L: linux-media@vger.kernel.org
> --
> 2.28.0
>

\
 
 \ /
  Last update: 2020-11-04 22:49    [W:2.057 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site