lkml.org 
[lkml]   [2020]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v4 3/5] drm: panel: simple: Allow specifying the delay from prepare to enable
    Hi Douglas,

    On Mon, Nov 09, 2020 at 05:00:57PM -0800, Douglas Anderson wrote:
    > On the panel I'm looking at, there's an 80 ms minimum time between HPD
    > being asserted by the panel and setting the backlight enable GPIO.
    > While we could just add an 80 ms "enable" delay, this is not ideal.
    > Link training is allowed to happen in parallel with this delay so the
    > fixed 80 ms delay over-delays.
    >
    > We'll support this by logging the time at the end of prepare and then
    > delaying in enable if enough time hasn't passed.
    >
    > Signed-off-by: Douglas Anderson <dianders@chromium.org>
    Applied too.

    Sam

    \
     
     \ /
      Last update: 2020-11-29 23:13    [W:5.867 / U:0.304 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site