lkml.org 
[lkml]   [2020]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] e1000e: Assign DPM_FLAG_SMART_SUSPEND and DPM_FLAG_MAY_SKIP_RESUME to speed up s2ram
Hi Kai-Heng,
On Wed, Nov 25, 2020 at 01:17:28AM +0800, Kai-Heng Feng wrote:
> Hi Yu,
>
> > On Nov 24, 2020, at 23:32, Chen Yu <yu.c.chen@intel.com> wrote:
> >
> > The NIC is put in runtime suspend status when there is no wire connected.
> > As a result, it is safe to keep this NIC in runtime suspended during s2ram
> > because the system does not rely on the NIC plug event nor WOL to wake up
> > the system. Unlike the s2idle, s2ram does not need to manipulate S0ix settings
> > during suspend.
>
> Please see below for the reason why I explicitly disable direct-complete in the driver.
>
Okay.
> >
> > This patch assigns DPM_FLAG_SMART_SUSPEND and DPM_FLAG_MAY_SKIP_RESUME
> > to the e1000e driver so that the s2ram could skip the .suspend_late(),
> > .suspend_noirq() and .resume_noirq() .resume_early() when possible.
> > Also skip .suspend() and .resume() if dev_pm_skip_suspend() and
> > dev_pm_skip_resume() return true, so as to speed up the s2ram.
>
> If we really want direct-complete here, maybe always set current WoL setting in runtime suspend routine?
>
Indeed, that would be a choice.
> >
> > Signed-off-by: Chen Yu <yu.c.chen@intel.com>
> > ---
> > drivers/base/power/main.c | 2 ++
> > drivers/net/ethernet/intel/e1000e/netdev.c | 14 +++++++++++++-
> > 2 files changed, 15 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
> > index c7ac49042cee..9cd8abba8612 100644
> > --- a/drivers/base/power/main.c
> > +++ b/drivers/base/power/main.c
> > @@ -580,6 +580,7 @@ bool dev_pm_skip_resume(struct device *dev)
> >
> > return !dev->power.must_resume;
> > }
> > +EXPORT_SYMBOL_GPL(dev_pm_skip_resume);
>
> I don't think it's a good idea to use this predicate out side of PM core, must_resume may change during suspend process.
>
The dev_pm_skip_resume() is used during system resume, not during suspend, so
there would be no race condition I suppose?
> >
> > /**
> > * device_resume_noirq - Execute a "noirq resume" callback for given device.
> > @@ -2010,3 +2011,4 @@ bool dev_pm_skip_suspend(struct device *dev)
> > return dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND) &&
> > pm_runtime_status_suspended(dev);
> > }
> > +EXPORT_SYMBOL_GPL(dev_pm_skip_suspend);
> > diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
> > index b30f00891c03..d79fddabc553 100644
> > --- a/drivers/net/ethernet/intel/e1000e/netdev.c
> > +++ b/drivers/net/ethernet/intel/e1000e/netdev.c
> > @@ -6965,6 +6965,14 @@ static __maybe_unused int e1000e_pm_suspend(struct device *dev)
> > struct e1000_hw *hw = &adapter->hw;
> > int rc;
> >
> > + /* Runtime suspended means that there is no wired connection
> > + * and it has nothing to do with WOL that, we don't need to
> > + * adjust the WOL settings. So it is safe to put NIC in
> > + * runtime suspend while doing system suspend.
> > + */
>
> What about plugging ethernet cable and using WoL after system is suspended?
> Commit "e1000e: Exclude device from suspend direct complete optimization" was to address that scenario.
>
Yes, this is what I concerned previously. So in order to support this case,
let's adjust this by checking
if (device_may_wakeup() && dev_pm_skip_suspend())

so that if the user has disabled WOL via sysfs then we do not fall
into this optimization
commit 6bf6be1127f7 ("e1000e: Do not wake up the system via WOL if
device wakeup is disabled")
> > + if (dev_pm_skip_suspend(dev))
> > + return 0;
> > +
> > e1000e_flush_lpic(pdev);
> >
> > e1000e_pm_freeze(dev);
> > @@ -6989,6 +6997,9 @@ static __maybe_unused int e1000e_pm_resume(struct device *dev)
> > struct e1000_hw *hw = &adapter->hw;
> > int rc;
> >
> > + if (dev_pm_skip_resume(dev))
> > + return 0;
> > +
> > /* Introduce S0ix implementation */
> > if (hw->mac.type >= e1000_pch_cnp &&
> > !e1000e_check_me(hw->adapter->pdev->device))
> > @@ -7665,7 +7676,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> >
> > e1000_print_device_info(adapter);
> >
> > - dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
> > + dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE |
> > + DPM_FLAG_SMART_SUSPEND | DPM_FLAG_MAY_SKIP_RESUME);
> >
> > if (pci_dev_run_wake(pdev) && hw->mac.type < e1000_pch_cnp)
> > pm_runtime_put_noidle(&pdev->dev);
>
> Also, most e1000e device on modern platforms doesn't runtime suspend at all after commit "e1000e: Disable runtime PM on CNP+".
>
Yes, I did some hack on this to make runtime suspend work.
As we do have more newer NICs to come, how about removing the
restriction of runtime suspend and let the user determine whether
to enable the runtime suspend via echo 'on' or 'auto' via
sysfs's control.

thanks,
Chenyu
> Kai-Heng
>
> > --
> > 2.25.1
> >
>

\
 
 \ /
  Last update: 2020-11-25 11:34    [W:0.162 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site