lkml.org 
[lkml]   [2020]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 4/6] irqchip: ocelot: Add support for Luton platforms
Date
This patch extends irqchip driver for oceleot to be used with an other
vcoreiii base platform: Luton.

For this platform there is a few differences:
- the interrupt must be enabled for the parent controller
- there is no trigger register needed to be managed

Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
drivers/irqchip/irq-mscc-ocelot.c | 38 +++++++++++++++++++++++++++----
1 file changed, 34 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-mscc-ocelot.c b/drivers/irqchip/irq-mscc-ocelot.c
index 6d4029a2ded0..496f955b8fc4 100644
--- a/drivers/irqchip/irq-mscc-ocelot.c
+++ b/drivers/irqchip/irq-mscc-ocelot.c
@@ -16,6 +16,7 @@
#define ICPU_CFG_INTR_INTR_TRIGGER(_p, x) ((_p)->reg_off_trigger + 0x4 * (x))

#define FLAGS_HAS_TRIGGER BIT(0)
+#define FLAGS_NEED_INIT_ENABLE BIT(1)

struct chip_props {
u8 flags;
@@ -40,6 +41,17 @@ static struct chip_props ocelot_props = {
.n_irq = 24,
};

+static struct chip_props luton_props = {
+ .flags = FLAGS_NEED_INIT_ENABLE,
+ .reg_off_sticky = 0,
+ .reg_off_ena = 0x4,
+ .reg_off_ena_clr = 0x8,
+ .reg_off_ena_set = 0xc,
+ .reg_off_ident = 0x18,
+ .reg_off_ena_irq0 = 0x14,
+ .n_irq = 28,
+};
+
static void ocelot_irq_unmask(struct irq_data *data)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
@@ -115,17 +127,27 @@ static int __init vcoreiii_irq_init(struct device_node *node,
goto err_gc_free;
}

- gc->chip_types[0].regs.ack = p->reg_off_sticky;
- gc->chip_types[0].regs.mask = p->reg_off_ena_clr;
gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
- gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
- if (p->flags & FLAGS_HAS_TRIGGER)
+ gc->chip_types[0].regs.ack = p->reg_off_sticky;
+ if (p->flags & FLAGS_HAS_TRIGGER) {
+ gc->chip_types[0].regs.mask = p->reg_off_ena_clr;
gc->chip_types[0].chip.irq_unmask = ocelot_irq_unmask;
+ gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
+ } else {
+ gc->chip_types[0].regs.enable = p->reg_off_ena_set;
+ gc->chip_types[0].regs.disable = p->reg_off_ena_clr;
+ gc->chip_types[0].chip.irq_mask = irq_gc_mask_disable_reg;
+ gc->chip_types[0].chip.irq_unmask = irq_gc_unmask_enable_reg;
+ }

/* Mask and ack all interrupts */
irq_reg_writel(gc, 0, p->reg_off_ena);
irq_reg_writel(gc, 0xffffffff, p->reg_off_sticky);

+ /* Overall init */
+ if (p->flags & FLAGS_NEED_INIT_ENABLE)
+ irq_reg_writel(gc, BIT(0), p->reg_off_ena_irq0);
+
domain->host_data = p;
irq_set_chained_handler_and_data(parent_irq, ocelot_irq_handler,
domain);
@@ -148,3 +170,11 @@ static int __init ocelot_irq_init(struct device_node *node,
}

IRQCHIP_DECLARE(ocelot_icpu, "mscc,ocelot-icpu-intr", ocelot_irq_init);
+
+static int __init luton_irq_init(struct device_node *node,
+ struct device_node *parent)
+{
+ return vcoreiii_irq_init(node, parent, &luton_props);
+}
+
+IRQCHIP_DECLARE(luton_icpu, "mscc,luton-icpu-intr", luton_irq_init);
--
2.29.2
\
 
 \ /
  Last update: 2020-11-25 11:33    [W:0.104 / U:1.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site