lkml.org 
[lkml]   [2020]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] arm64: dts: sdm845: Add iommus property to qup
On 2020-11-22 03:41, Bjorn Andersson wrote:
> From: Stephen Boyd <swboyd@chromium.org>
>
> The SMMU that sits in front of the QUP needs to be programmed properly
> so that the i2c geni driver can allocate DMA descriptors. Failure to do
> this leads to faults when using devices such as an i2c touchscreen where
> the transaction is larger than 32 bytes and we use a DMA buffer.
>
> arm-smmu 15000000.iommu: Unexpected global fault, this could be serious
> arm-smmu 15000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000002, GFSYNR1 0x000006c0, GFSYNR2 0x00000000
>
> Add the right SID and mask so this works.
>
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> [bjorn: Define for second QUP as well, be more specific in sdm845.dtsi]
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 2 ++
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 ++
> 2 files changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> index 39f23cdcbd02..216a74f0057c 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> @@ -653,10 +653,12 @@ &pm8998_pwrkey {
>
> &qupv3_id_0 {
> status = "okay";
> + iommus = <&apps_smmu 0x0 0x3>;
> };
>
> &qupv3_id_1 {
> status = "okay";
> + iommus = <&apps_smmu 0x6c0 0x3>;
> };
>
> &sdhc_2 {
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 6465a6653ad9..d6b7b1bfa202 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -1120,6 +1120,7 @@ qupv3_id_0: geniqup@8c0000 {
> clock-names = "m-ahb", "s-ahb";
> clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> + iommus = <&apps_smmu 0x3 0x0>;
> #address-cells = <2>;
> #size-cells = <2>;
> ranges;
> @@ -1460,6 +1461,7 @@ qupv3_id_1: geniqup@ac0000 {
> clock-names = "m-ahb", "s-ahb";
> clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> + iommus = <&apps_smmu 0x6c3 0x0>;
> #address-cells = <2>;
> #size-cells = <2>;
> ranges;

Tested-By: Caleb Connolly <caleb@connolly.tech>

Works on the OnePlus 6.


\
 
 \ /
  Last update: 2020-11-23 06:17    [W:0.406 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site