lkml.org 
[lkml]   [2020]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 1/2] dt-bindings: dma: Add bindings for Intel LGM SoC
On 20-11-20, 19:30, Reddy, MallikarjunaX wrote:
> Hi Vinod,
> Thanks for the review. My comments inline.
>
> On 11/18/2020 11:55 PM, Vinod Koul wrote:
> > On 12-11-20, 13:38, Amireddy Mallikarjuna reddy wrote:
> > > Add DT bindings YAML schema for DMA controller driver
> > > of Lightning Mountain (LGM) SoC.
> > >
> > > Signed-off-by: Amireddy Mallikarjuna reddy <mallikarjunax.reddy@linux.intel.com>
> > > ---
> > > v1:
> > > - Initial version.
> > >
> > > v2:
> > > - Fix bot errors.
> > >
> > > v3:
> > > - No change.
> > >
> > > v4:
> > > - Address Thomas langer comments
> > > - use node name pattern as dma-controller as in common binding.
> > > - Remove "_" (underscore) in instance name.
> > > - Remove "port-" and "chan-" in attribute name for both 'dma-ports' & 'dma-channels' child nodes.
> > >
> > > v5:
> > > - Moved some of the attributes in 'dma-ports' & 'dma-channels' child nodes to dma client/consumer side as cells in 'dmas' properties.
> > >
> > > v6:
> > > - Add additionalProperties: false
> > > - completely removed 'dma-ports' and 'dma-channels' child nodes.
> > > - Moved channel dt properties to client side dmas.
> > > - Use standard dma-channels and dma-channel-mask properties.
> > > - Documented reset-names
> > > - Add description for dma-cells
> > >
> > > v7:
> > > - modified compatible to oneof
> > > - Reduced number of dma-cells to 3
> > > - Fine tune the description of some properties.
> > >
> > > v7-resend:
> > > - rebase to 5.10-rc1
> > >
> > > v8:
> > > - rebased to 5.10-rc3
> > > - Fixing the bot issues (wrong indentation)
> > >
> > > v9:
> > > - rebased to 5.10-rc3
> > > - Use 'enum' instead of oneOf+const
> > > - Drop '#dma-cells' in required:, already covered in dma-common.yaml
> > > - Drop nodename Already covered by dma-controller.yaml
> > > ---
> > > .../devicetree/bindings/dma/intel,ldma.yaml | 130 +++++++++++++++++++++
> > > 1 file changed, 130 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/dma/intel,ldma.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
> > > new file mode 100644
> > > index 000000000000..c06281a10178
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
> > > @@ -0,0 +1,130 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Lightning Mountain centralized low speed DMA and high speed DMA controllers.
> > > +
> > > +maintainers:
> > > + - chuanhua.lei@intel.com
> > > + - mallikarjunax.reddy@intel.com
> > > +
> > > +allOf:
> > > + - $ref: "dma-controller.yaml#"
> > > +
> > > +properties:
> > > + compatible:
> > > + enum:
> > > + - intel,lgm-cdma
> > > + - intel,lgm-dma2tx
> > > + - intel,lgm-dma1rx
> > > + - intel,lgm-dma1tx
> > > + - intel,lgm-dma0tx
> > > + - intel,lgm-dma3
> > > + - intel,lgm-toe-dma30
> > > + - intel,lgm-toe-dma31
> > > +
> > > + reg:
> > > + maxItems: 1
> > > +
> > > + "#dma-cells":
> > > + const: 3
> > > + description:
> > > + The first cell is the peripheral's DMA request line.
> > > + The second cell is the peripheral's (port) number corresponding to the channel.
> > > + The third cell is the burst length of the channel.
> > > +
> > > + dma-channels:
> > > + minimum: 1
> > > + maximum: 16
> > > +
> > > + dma-channel-mask:
> > > + maxItems: 1
> > > +
> > > + clocks:
> > > + maxItems: 1
> > > +
> > > + resets:
> > > + maxItems: 1
> > > +
> > > + reset-names:
> > > + items:
> > > + - const: ctrl
> > > +
> > > + interrupts:
> > > + maxItems: 1
> > > +
> > > + intel,dma-poll-cnt:
> > > + $ref: /schemas/types.yaml#definitions/uint32
> > > + description:
> > > + DMA descriptor polling counter is used to control the poling mechanism
> > s/poling/polling
> Ok, Thanks.
> >
> > > + for the descriptor fetching for all channels.
> > > +
> > > + intel,dma-byte-en:
> > > + type: boolean
> > > + description:
> > > + DMA byte enable is only valid for DMA write(RX).
> > > + Byte enable(1) means DMA write will be based on the number of dwords
> > > + instead of the whole burst.
> > Can you explain this, also sounds you could use _maxburst values..?
> when dma-byte-en = 0 (disabled) DMA write will be in terms of burst length,
> dma-byte-en = 1 (enabled) write will be in terms of Dwords.
>
> Byte enable = 0 (Disabled) means that DMA write will be based on the burst
> length, even if it only transmits one byte.
> Byte enable = 1(enabled) means that DMA write will be based on the number of
> Dwords, instead of the whole burst.

Sounds like a hw property or is this configurable to engine..?
>
> >
> > > +
> > > + intel,dma-drb:
> > > + type: boolean
> > > + description:
> > > + DMA descriptor read back to make sure data and desc synchronization.
> > > +
> > > + intel,dma-desc-in-sram:
> > > + type: boolean
> > > + description:
> > > + DMA descritpors in SRAM or not. Some old controllers descriptors
> > > + can be in DRAM or SRAM. The new ones are all in SRAM.
> > should that not be decided by driver..? Or is this a hw property?
> This is DMA controller capability. It can be decided from driver also. i
> will change accordingly.
> >
> > > +
> > > + intel,dma-orrc:
> > > + $ref: /schemas/types.yaml#definitions/uint32
> > > + description:
> > > + DMA outstanding read counter value determine the number of
> > > + ORR-Outstanding Read Request. The maximum value is 16.
> > How would this be used by folks..?
> A register bit will be used to enable/disable the ORR feature.
>
> Outstanding Read Capability introduce CMD FIFO to support up to 16
> outstanding reads for different packet in same channel.
>
> For large packets up to 16 OR can be issued, the number of OR is
> configurable.

How will configure this and when..?

> >
> > > +
> > > + intel,dma-dburst-wr:
> > > + type: boolean
> > > + description:
> > > + Enable RX dynamic burst write. When it is enabled, the DMA does RX dynamic burst;
> > > + if it is disabled, the DMA RX will still support programmable fixed burst size of 2,4,8,16.
> > > + It only applies to RX DMA and memcopy DMA.
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > So only two are mandatory, what about the bunch of intel properties you
> > added above..?
> Some of the properties are DMA capabilities, Enabling from device tree.
> other properties will use default values from driver if we dont pass it from
> device tree.


--
~Vinod

\
 
 \ /
  Last update: 2020-11-21 13:21    [W:0.095 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site