lkml.org 
[lkml]   [2020]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 1/4] dt-binding: mt8183: Add Mediatek MDP3 dt-bindings
Hi, Daoyuan:

Daoyuan Huang <daoyuan.huang@mediatek.com> 於 2020年11月20日 週五 上午10:41寫道:
>
> From: daoyuan huang <daoyuan.huang@mediatek.com>
>
> This patch adds DT binding document for Media Data Path 3 (MDP3)
> a unit in multimedia system used for scaling and color format convert.
>
> Signed-off-by: Ping-Hsun Wu <ping-hsun.wu@mediatek.com>
> Signed-off-by: daoyuan huang <daoyuan.huang@mediatek.com>
> ---
> .../bindings/media/mediatek,mt8183-mdp3.txt | 208 ++++++++++++++++++
> 1 file changed, 208 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt b/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt
> new file mode 100644
> index 000000000000..d4db908b8b53
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt
> @@ -0,0 +1,208 @@
> +* Mediatek Media Data Path 3
> +
> +Media Data Path 3 (MDP3) is used for scaling and color space conversion.
> +
> +Required properties (controller node):
> +- compatible: "mediatek,mt8183-mdp3"
> +- mediatek,scp: the node of system control processor (SCP), using the
> + remoteproc & rpmsg framework, see
> + Documentation/devicetree/bindings/remoteproc/mtk,scp.txt for details.
> +- mediatek,mmsys: the node of mux(multiplexer) controller for HW connections.
> +- mediatek,mm-mutex: the node of sof(start of frame) signal controller.
> +- mediatek,mailbox-gce: the node of global command engine (GCE), used to
> + read/write registers with critical time limitation, see
> + Documentation/devicetree/bindings/mailbox/mtk-gce.txt for details.
> +- mboxes: mailbox number used to communicate with GCE.
> +- gce-subsys: sub-system id corresponding to the register address.

This is already defined in mediatek,gce-client-reg, so remove this.

> +- gce-event-names: in use event name list, used to correspond to event IDs.
> +- gce-events: in use event IDs list, all IDs are defined in
> + 'dt-bindings/gce/mt8183-gce.h'.
> +
> +Required properties (all function blocks, child node):
> +- compatible: Should be one of
> + "mediatek,mt8183-mdp-rdma" - read DMA
> + "mediatek,mt8183-mdp-rsz" - resizer
> + "mediatek,mt8183-mdp-wdma" - write DMA
> + "mediatek,mt8183-mdp-wrot" - write DMA with rotation
> + "mediatek,mt8183-mdp-ccorr" - color correction with 3X3 matrix
> +- reg: Physical base address and length of the function block register space.
> +- clocks: device clocks, see
> + Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +- power-domains: A phandle to the power domain, see
> + Documentation/devicetree/bindings/power/power_domain.txt for details.
> +- mediatek,mdp-id: HW index to distinguish same functionality modules.
> +
> +Required properties (DMA function blocks, child node):
> +- compatible: Should be one of
> + "mediatek,mt8183-mdp-rdma"
> + "mediatek,mt8183-mdp-wdma"
> + "mediatek,mt8183-mdp-wrot"
> +- mdp-comps(wdma & wrot only):
> + "mediatek,mt8183-mdp-path" - MDP output path selection, create a
> + component for path connectedness of HW
> + pipe control; Align with mdp_comp_of_ids[]
> + in mtk-mdp3-comp.c.
> +- mdp-comp-ids(wdma & wrot only): Index of the output paths, the number aligns
> + with mdp_comp_matches[] in mtk-mdp3-comp.c.
> +- iommus: should point to the respective IOMMU block with master port as
> + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt for
> + details.
> +- mediatek,larb: Must contain the local arbiters in the current Socs, see
> + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt for
> + details.
> +
> +Required properties (input path selection node):
> +- compatible:
> + "mediatek,mt8183-mmsys" - For MDP input/output source selection.

mmsys is defined in mediatek,mmsys.txt [1], so move this there.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt?h=v5.10-rc4

> +- mdp-comps:
> + "mediatek,mt8183-mdp-dl" - MDP direct link input path selection,
> + create a component for path connectedness
> + of HW pipe control; Align with
> + mdp_comp_of_ids[] in mtk-mdp3-comp.c.
> +- mdp-comp-ids: Index of the input paths, the number aligns with
> + mdp_comp_matches[] in mtk-mdp3-comp.c.
> +- reg: Physical base address and length of the function block register space.
> +- clocks: device clocks, see
> + Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +
> +Required properties (ISP PASS2 (DIP) module path selection node):
> +- compatible:
> + "mediatek,mt8183-imgsys" - For ISP PASS2 (DIP) modules frame sync
> + control with MDP.

imgsys is defined in mediatek,imgsys.txt [2], so move this there.

[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt?h=v5.10-rc4

> +- mdp-comps:
> + "mediatek,mt8183-mdp-imgi" - Input DMA of ISP PASS2 (DIP) module for
> + raw image input.
> + "mediatek,mt8183-mdp-exto" - Output DMA of ISP PASS2 (DIP) module for
> + yuv image output.
> +- mdp-comp-ids: Index of the modules, the number aligns with mdp_comp_matches[]
> + in mtk-mdp3-comp.c.
> +- reg: Physical base address and length of the function block register space.
> +- mediatek,mdp-id: HW index to distinguish same functionality modules.
> +
> +Example:
> + mmsys: syscon@14000000 {
> + compatible = "mediatek,mt8183-mmsys", "syscon";
> + mdp-comps = "mediatek,mt8183-mdp-dl",
> + "mediatek,mt8183-mdp-dl";
> + mdp-comp-ids = <0 1>;
> + reg = <0 0x14000000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
> + #clock-cells = <1>;
> + clocks = <&mmsys CLK_MM_MDP_DL_TXCK>,
> + <&mmsys CLK_MM_MDP_DL_RX>,
> + <&mmsys CLK_MM_IPU_DL_TXCK>,
> + <&mmsys CLK_MM_IPU_DL_RX>;
> + };
> +
> + mdp_rdma0: mdp-rdma0@14001000 {
> + compatible = "mediatek,mt8183-mdp-rdma",
> + "mediatek,mt8183-mdp3";
> + mediatek,scp = <&scp>;
> + mediatek,mdp-id = <0>;
> + reg = <0 0x14001000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
> + power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_MDP_RDMA0>,
> + <&mmsys CLK_MM_MDP_RSZ1>;

Why place CLK_MM_MDP_RSZ1 in mdp_rdma0 device?

> + iommus = <&iommu M4U_PORT_MDP_RDMA0>;
> + mediatek,larb = <&larb0>;
> + mediatek,mmsys = <&mmsys>;
> + mediatek,mm-mutex = <&mutex>;
> + mediatek,imgsys = <&imgsys>;
> + mediatek,mailbox-gce = <&gce>;
> + mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
> + <&gce 21 CMDQ_THR_PRIO_LOWEST 0>,
> + <&gce 22 CMDQ_THR_PRIO_LOWEST 0>,
> + <&gce 23 CMDQ_THR_PRIO_LOWEST 0>;
> + gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
> + <&gce 0x14010000 SUBSYS_1401XXXX>,
> + <&gce 0x14020000 SUBSYS_1402XXXX>,
> + <&gce 0x15020000 SUBSYS_1502XXXX>;
> + mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
> + <CMDQ_EVENT_MDP_RDMA0_EOF>,
> + <CMDQ_EVENT_MDP_RSZ0_SOF>,

mdp_rsz0 send CMDQ_EVENT_MDP_RSZ0_SOF to gce, so move
CMDQ_EVENT_MDP_RSZ0_SOF to mdp_rsz0.

> + <CMDQ_EVENT_MDP_RSZ1_SOF>,
> + <CMDQ_EVENT_MDP_TDSHP_SOF>,
> + <CMDQ_EVENT_MDP_WROT0_SOF>,
> + <CMDQ_EVENT_MDP_WROT0_EOF>,
> + <CMDQ_EVENT_MDP_WDMA0_SOF>,
> + <CMDQ_EVENT_MDP_WDMA0_EOF>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_0>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_1>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_2>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_3>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_4>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_5>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_6>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_7>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_8>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_9>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_10>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_11>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_12>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_13>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_14>,
> + <CMDQ_EVENT_WPE_A_DONE>,

warp send CMDQ_EVENT_WPE_A_DONE to gce, so move CMDQ_EVENT_WPE_A_DONE
to warp device.

Regards,
Chun-Kuang.

> + <CMDQ_EVENT_SPE_B_DONE>;
> + };
> +
> + mdp_rsz0: mdp-rsz0@14003000 {
> + compatible = "mediatek,mt8183-mdp-rsz";
> + mediatek,mdp-id = <0>;
> + reg = <0 0x14003000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_RSZ0>;
> + };
> +
> + mdp_rsz1: mdp-rsz1@14004000 {
> + compatible = "mediatek,mt8183-mdp-rsz";
> + mediatek,mdp-id = <1>;
> + reg = <0 0x14004000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_RSZ1>;
> + };
> +
> + mdp_wrot0: mdp-wrot0@14005000 {
> + compatible = "mediatek,mt8183-mdp-wrot";
> + mediatek,mdp-id = <0>;
> + mdp-comps = "mediatek,mt8183-mdp-path";
> + mdp-comp-ids = <0>;
> + reg = <0 0x14005000 0 0x1000>;
> + power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_WROT0>;
> + iommus = <&iommu M4U_PORT_MDP_WROT0>;
> + mediatek,larb = <&larb0>;
> + };
> +
> + mdp_wdma: mdp-wdma@14006000 {
> + compatible = "mediatek,mt8183-mdp-wdma";
> + mediatek,mdp-id = <0>;
> + mdp-comps = "mediatek,mt8183-mdp-path";
> + mdp-comp-ids = <1>;
> + reg = <0 0x14006000 0 0x1000>;
> + power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_WDMA0>;
> + iommus = <&iommu M4U_PORT_MDP_WDMA0>;
> + mediatek,larb = <&larb0>;
> + };
> +
> + mdp_ccorr: mdp-ccorr@1401c000 {
> + compatible = "mediatek,mt8183-mdp-ccorr";
> + mediatek,mdp-id = <0>;
> + reg = <0 0x1401c000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_CCORR>;
> + };
> +
> + imgsys: syscon@15020000 {
> + compatible = "mediatek,mt8183-imgsys", "syscon";
> + mediatek,mdp-id = <0>;
> + mdp-comps = "mediatek,mt8183-mdp-imgi",
> + "mediatek,mt8183-mdp-exto";
> + mdp-comp-ids = <0 1>;
> + reg = <0 0x15020000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1502XXXX 0 0x1000>;
> + #clock-cells = <1>;
> + };
> --
> 2.18.0
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

\
 
 \ /
  Last update: 2020-11-20 15:42    [W:0.165 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site