lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND 19/19] scsi: hpsa: Strip out a bunch of set but unused variables
Date
Fixes the following W=1 kernel build warning(s):

drivers/scsi/hpsa.c: In function ‘hpsa_volume_offline’:
drivers/scsi/hpsa.c:3885:5: warning: variable ‘scsi_status’ set but not used [-Wunused-but-set-variable]
drivers/scsi/hpsa.c:3884:6: warning: variable ‘cmd_status’ set but not used [-Wunused-but-set-variable]
drivers/scsi/hpsa.c: In function ‘hpsa_update_scsi_devices’:
drivers/scsi/hpsa.c:4354:9: warning: variable ‘n_ext_target_devs’ set but not used [-Wunused-but-set-variable]
drivers/scsi/hpsa.c: In function ‘hpsa_scatter_gather’:
drivers/scsi/hpsa.c:4583:36: warning: variable ‘last_sg’ set but not used [-Wunused-but-set-variable]
drivers/scsi/hpsa.c: In function ‘hpsa_init_one’:
drivers/scsi/hpsa.c:8639:6: warning: variable ‘dac’ set but not used [-Wunused-but-set-variable]
drivers/scsi/hpsa.c: In function ‘hpsa_enter_performant_mode’:
drivers/scsi/hpsa.c:9300:7: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]

Cc: Don Brace <don.brace@microchip.com>
Cc: Bugfixes to <esc.storagedev@microsemi.com>
Cc: storagedev@microchip.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/scsi/hpsa.c | 25 +++++++------------------
1 file changed, 7 insertions(+), 18 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 16fd378285d27..02e20bed8a484 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3881,8 +3881,6 @@ static unsigned char hpsa_volume_offline(struct ctlr_info *h,
u8 sense_key, asc, ascq;
int sense_len;
int rc, ldstat = 0;
- u16 cmd_status;
- u8 scsi_status;
#define ASC_LUN_NOT_READY 0x04
#define ASCQ_LUN_NOT_READY_FORMAT_IN_PROGRESS 0x04
#define ASCQ_LUN_NOT_READY_INITIALIZING_CMD_REQ 0x02
@@ -3902,8 +3900,6 @@ static unsigned char hpsa_volume_offline(struct ctlr_info *h,
else
sense_len = c->err_info->SenseLen;
decode_sense_data(sense, sense_len, &sense_key, &asc, &ascq);
- cmd_status = c->err_info->CommandStatus;
- scsi_status = c->err_info->ScsiStatus;
cmd_free(h, c);

/* Determine the reason for not ready state */
@@ -4351,7 +4347,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
u32 ndev_allocated = 0;
struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice;
int ncurrent = 0;
- int i, n_ext_target_devs, ndevs_to_allocate;
+ int i, ndevs_to_allocate;
int raid_ctlr_position;
bool physical_device;
DECLARE_BITMAP(lunzerobits, MAX_EXT_TARGETS);
@@ -4416,7 +4412,6 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
raid_ctlr_position = nphysicals + nlogicals;

/* adjust our table of devices */
- n_ext_target_devs = 0;
for (i = 0; i < nphysicals + nlogicals + 1; i++) {
u8 *lunaddrbytes, is_OBDR = 0;
int rc = 0;
@@ -4580,7 +4575,7 @@ static int hpsa_scatter_gather(struct ctlr_info *h,
struct scsi_cmnd *cmd)
{
struct scatterlist *sg;
- int use_sg, i, sg_limit, chained, last_sg;
+ int use_sg, i, sg_limit, chained;
struct SGDescriptor *curr_sg;

BUG_ON(scsi_sg_count(cmd) > h->maxsgentries);
@@ -4602,7 +4597,6 @@ static int hpsa_scatter_gather(struct ctlr_info *h,
curr_sg = cp->SG;
chained = use_sg > h->max_cmd_sg_entries;
sg_limit = chained ? h->max_cmd_sg_entries - 1 : use_sg;
- last_sg = scsi_sg_count(cmd) - 1;
scsi_for_each_sg(cmd, sg, sg_limit, i) {
hpsa_set_sg_descriptor(curr_sg, sg);
curr_sg++;
@@ -8635,7 +8629,7 @@ static struct ctlr_info *hpda_alloc_ctlr_info(void)

static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
- int dac, rc;
+ int rc;
struct ctlr_info *h;
int try_soft_reset = 0;
unsigned long flags;
@@ -8711,13 +8705,9 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)

/* configure PCI DMA stuff */
rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
- if (rc == 0) {
- dac = 1;
- } else {
+ if (rc != 0)
rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (rc == 0) {
- dac = 0;
- } else {
+ if (rc != 0) {
dev_err(&pdev->dev, "no suitable DMA available\n");
goto clean3; /* shost, pci, lu, aer/h */
}
@@ -9298,10 +9288,9 @@ static int hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
} else if (trans_support & CFGTBL_Trans_io_accel2) {
u64 cfg_offset, cfg_base_addr_index;
u32 bft2_offset, cfg_base_addr;
- int rc;

- rc = hpsa_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr,
- &cfg_base_addr_index, &cfg_offset);
+ hpsa_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr,
+ &cfg_base_addr_index, &cfg_offset);
BUILD_BUG_ON(offsetof(struct io_accel2_cmd, sg) != 64);
bft2[15] = h->ioaccel_maxsg + HPSA_IOACCEL2_HEADER_SZ;
calc_bucket_map(bft2, ARRAY_SIZE(bft2), h->ioaccel_maxsg,
--
2.25.1
\
 
 \ /
  Last update: 2020-11-02 15:25    [W:0.229 / U:0.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site