lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] serial: 8250_mtk: Fix uart_get_baud_rate warning
Date
Mediatek 8250 port supports speed higher than uartclk / 16. If the baud
rates in both the new and the old termios setting are higher than
uartclk / 16, the WARN_ON in uart_get_baud_rate() will be triggered.
Passing NULL as the old termios so uart_get_baud_rate() will use
uartclk / 16 - 1 as the new baud rate which will be replaced by the
original baud rate later by tty_termios_encode_baud_rate() in
mtk8250_set_termios().

Fixes: 551e553f0d4a ("serial: 8250_mtk: Fix high-speed baud rates clamping")
Signed-off-by: Claire Chang <tientzu@chromium.org>
---
drivers/tty/serial/8250/8250_mtk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index 41f4120abdf2..fa876e2c13e5 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -317,7 +317,7 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
*/
baud = tty_termios_baud_rate(termios);

- serial8250_do_set_termios(port, termios, old);
+ serial8250_do_set_termios(port, termios, NULL);

tty_termios_encode_baud_rate(termios, baud, baud);

--
2.29.1.341.ge80a0c044ae-goog
\
 
 \ /
  Last update: 2020-11-02 13:09    [W:0.047 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site