lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/8] arm64: dts: ti: k3-j7200-common-proc-board: Enable PCIe
Date
x2 lane PCIe slot in the common processor board is enabled and connected to
j7200 SOM. Add PCIe DT node in common processor board to reflect the
same.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../boot/dts/ti/k3-j7200-common-proc-board.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 65a2e5aeb050..174a55a18522 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -6,6 +6,7 @@
/dts-v1/;

#include "k3-j7200-som-p0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/net/ti-dp83867.h>
#include <dt-bindings/mux/ti-serdes.h>
#include <dt-bindings/phy/phy.h>
@@ -236,3 +237,17 @@
resets = <&serdes_wiz0 3>;
};
};
+
+&pcie1_rc {
+ reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ num-lanes = <2>;
+};
+
+&pcie1_ep {
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ num-lanes = <2>;
+ status = "disabled";
+};
--
2.17.1
\
 
 \ /
  Last update: 2020-11-02 11:13    [W:0.126 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site