Messages in this thread Patch in this message | | | Date | Mon, 2 Nov 2020 11:06:32 +0100 | From | Maxime Ripard <> | Subject | Re: [PATCH v2 5/6] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC |
| |
On Fri, Oct 30, 2020 at 11:43:24PM +0000, Matteo Scordino wrote: > The Elimo Engineering Initium is an Open Source Hardware Single Board > Computer based on the Elimo Impetus SoM. > > It is meant as the first development platform for the Impetus, providing > convenient access to the peripherals on the Impetus. > > It provides: > USB-C power input > UART-to-USB bridge on the USB-C connector, connected to UART1 > USB-A connector for USB2.0 (Host, Device, OTG) > Audio Line In/Out > Pin header to access all signals on the M2 connector of the SoM > > Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/sun8i-s3-elimo-initium.dts | 28 ++++++++++++++++++++ > 2 files changed, 29 insertions(+) > create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 4f0adfead547..dcfb8d39c267 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -1210,6 +1210,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ > sun8i-r40-bananapi-m2-ultra.dtb \ > sun8i-s3-lichee-zero-plus.dtb \ > sun8i-s3-pinecube.dtb \ > + sun8i-s3-elimo-initium.dtb \
This should be sorted as well
> sun8i-t3-cqa3t-bv3.dtb \ > sun8i-v3s-licheepi-zero.dtb \ > sun8i-v3s-licheepi-zero-dock.dtb \ > diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts > new file mode 100644 > index 000000000000..7677ddc07bf9 > --- /dev/null > +++ b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts > @@ -0,0 +1,28 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io> > + */ > + > +/dts-v1/; > +#include "sun8i-s3-elimo-impetus.dtsi" > + > +/ { > + model = "Elimo Initium"; > + compatible = "elimo,initium", "elimo,impetus", "sochip,s3", > + "allwinner,sun8i-v3"; You should indent that properly
> + aliases { > + serial0 = &uart0; > + serial1 = &uart1; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +};
It's already in the DTSI, there's no need to duplicate it here
Maxime [unhandled content-type:application/pgp-signature] | |