lkml.org 
[lkml]   [2020]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH] tpm_tis: Disable interrupts on ThinkPad T490s
Date

Hans de Goede @ 2020-11-19 07:42 MST:

> Hi,
>
> On 11/19/20 7:36 AM, Jerry Snitselaar wrote:
>>
>> Matthew Garrett @ 2020-10-15 15:39 MST:
>>
>>> On Thu, Oct 15, 2020 at 2:44 PM Jerry Snitselaar <jsnitsel@redhat.com> wrote:
>>>>
>>>> There is a misconfiguration in the bios of the gpio pin used for the
>>>> interrupt in the T490s. When interrupts are enabled in the tpm_tis
>>>> driver code this results in an interrupt storm. This was initially
>>>> reported when we attempted to enable the interrupt code in the tpm_tis
>>>> driver, which previously wasn't setting a flag to enable it. Due to
>>>> the reports of the interrupt storm that code was reverted and we went back
>>>> to polling instead of using interrupts. Now that we know the T490s problem
>>>> is a firmware issue, add code to check if the system is a T490s and
>>>> disable interrupts if that is the case. This will allow us to enable
>>>> interrupts for everyone else. If the user has a fixed bios they can
>>>> force the enabling of interrupts with tpm_tis.interrupts=1 on the
>>>> kernel command line.
>>>
>>> I think an implication of this is that systems haven't been
>>> well-tested with interrupts enabled. In general when we've found a
>>> firmware issue in one place it ends up happening elsewhere as well, so
>>> it wouldn't surprise me if there are other machines that will also be
>>> unhappy with interrupts enabled. Would it be possible to automatically
>>> detect this case (eg, if we get more than a certain number of
>>> interrupts in a certain timeframe immediately after enabling the
>>> interrupt) and automatically fall back to polling in that case? It
>>> would also mean that users with fixed firmware wouldn't need to pass a
>>> parameter.
>>
>> I believe Matthew is correct here. I found another system today
>> with completely different vendor for both the system and the tpm chip.
>> In addition another Lenovo model, the L490, has the issue.
>>
>> This initial attempt at a solution like Matthew suggested works on
>> the system I found today, but I imagine it is all sorts of wrong.
>> In the 2 systems where I've seen it, there are about 100000 interrupts
>> in around 1.5 seconds, and then the irq code shuts down the interrupt
>> because they aren't being handled.
>
> Is that with your patch? The IRQ should be silenced as soon as
> devm_free_irq(chip->dev.parent, priv->irq, chip); is called.
>

No that is just with James' patchset that enables interrupts for
tpm_tis. It looks like the irq is firing, but the tpm's int_status
register is clear, so the handler immediately returns IRQ_NONE. After
that happens 100000 times the core irq code shuts down the irq, but it
isn't released so I could still see the stats in /proc/interrupts. With
my attempt below on top of that patchset it releases the irq. I had to
stick the check prior to it checking the int_status register because it
is cleared and the handler returns, and I couldn't do the devm_free_irq
directly in tis_int_handler, so I tried sticking it in tpm_tis_send
where the other odd irq testing code was already located. I'm not sure
if there is another place that would work better for calling the
devm_free_irq.

> Depending on if we can get your storm-detection to work or not,
> we might also choose to just never try to use the IRQ (at least on
> x86 systems). AFAIK the TPM is never used for high-throughput stuff
> so the polling overhead should not be a big deal (and I'm getting the feeling
> that Windows always polls).
>

I was wondering about Windows as well. In addition to the Lenovo systems
which the T490s had Nuvoton tpm, the system I found yesterday was a development
system we have from a partner with an Infineon tpm. Dan Williams has
seen it internally at Intel as well on some system.

> Regards,
>
> Hans
>
>
>
>> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
>> index 49ae09ac604f..478e9d02a3fa 100644
>> --- a/drivers/char/tpm/tpm_tis_core.c
>> +++ b/drivers/char/tpm/tpm_tis_core.c
>> @@ -27,6 +27,11 @@
>> #include "tpm.h"
>> #include "tpm_tis_core.h"
>>
>> +static unsigned int time_start = 0;
>> +static bool storm_check = true;
>> +static bool storm_killed = false;
>> +static u32 irqs_fired = 0;
>> +
>> static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value);
>>
>> static void tpm_tis_enable_interrupt(struct tpm_chip *chip, u8 mask)
>> @@ -464,25 +469,31 @@ static int tpm_tis_send_data(struct tpm_chip *chip, const u8 *buf, size_t len)
>> return rc;
>> }
>>
>> -static void disable_interrupts(struct tpm_chip *chip)
>> +static void __disable_interrupts(struct tpm_chip *chip)
>> {
>> struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
>> u32 intmask;
>> int rc;
>>
>> - if (priv->irq == 0)
>> - return;
>> -
>> rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
>> if (rc < 0)
>> intmask = 0;
>>
>> intmask &= ~TPM_GLOBAL_INT_ENABLE;
>> rc = tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
>> + chip->flags &= ~TPM_CHIP_FLAG_IRQ;
>> +}
>> +
>> +static void disable_interrupts(struct tpm_chip *chip)
>> +{
>> + struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
>>
>> + if (priv->irq == 0)
>> + return;
>> +
>> + __disable_interrupts(chip);
>> devm_free_irq(chip->dev.parent, priv->irq, chip);
>> priv->irq = 0;
>> - chip->flags &= ~TPM_CHIP_FLAG_IRQ;
>> }
>>
>> /*
>> @@ -528,6 +539,12 @@ static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
>> int rc, irq;
>> struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
>>
>> + if (unlikely(storm_killed)) {
>> + devm_free_irq(chip->dev.parent, priv->irq, chip);
>> + priv->irq = 0;
>> + storm_killed = false;
>> + }
>> +
>> if (!(chip->flags & TPM_CHIP_FLAG_IRQ) || priv->irq_tested)
>> return tpm_tis_send_main(chip, buf, len);
>>
>> @@ -748,6 +765,21 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
>> u32 interrupt;
>> int i, rc;
>>
>> + if (storm_check) {
>> + irqs_fired++;
>> +
>> + if (!time_start) {
>> + time_start = jiffies_to_msecs(jiffies);
>> + } else if ((irqs_fired > 1000) && (jiffies_to_msecs(jiffies) - jiffies < 500)) {
>> + __disable_interrupts(chip);
>> + storm_check = false;
>> + storm_killed = true;
>> + return IRQ_HANDLED;
>> + } else if ((jiffies_to_msecs(jiffies) - time_start > 500) && (irqs_fired < 1000)) {
>> + storm_check = false;
>> + }
>> + }
>> +
>> rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
>> if (rc < 0)
>> return IRQ_NONE;
>>

\
 
 \ /
  Last update: 2020-11-19 18:07    [W:0.124 / U:0.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site