lkml.org 
[lkml]   [2020]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH] perf session: Fixup timestamp for ordered events
Hi Adrian,

On Wed, Nov 18, 2020 at 05:57:09PM +0200, Adrian Hunter wrote:

[...]

> >>> The follow diagram depicts the flow for how the AUX event is arriving
> >>> ahead than MMAP2 event:
> >>>
> >>> T1: T3: T4:
> >>> perf process Open PMU device Perf is scheduled out;
> >>> invoke perf_aux_output_end()
> >>> and generate AUX event
> >>> ^ ^ ^
> >>> | | |
> >>> CPU0 ---------------------------------------------------> (T)
> >>> \
> >>> \ Forked process is placed on another CPU
> >>> V
> >>> CPU1 ---------------------------------------------------> (T)
> >>> | |
> >>> V V
> >>> T2: T5:
> >>> Invoke execvp() for profiled Record MMAP2 event
> >>> program
> >>
> >> I don't understand. An MMAP at T5 cannot affect data recorded before T5
> >> (e.g. T4).
> >> Are you saying the timestamps from different CPUs are not in time order? Ot
> >> are you saying the data is actually recorded after T5?
> >
> > Here refers to the later one.
> >
> > I observed the PMU device is opened and closed for multiple times, so
> > the AUX events and MMAP2 events are interleave with each other. Below
> > is the dumping with debugging option "--debug ordered-events=1" (and I
> > added code for printing out event type value).
> >
> > When perf tool starts to decode the trace data for the first AUX event
> > (its timestamp is 160.767623) and try to synthesize samples, it doesn't
> > give chance for handling the sequential MMAP2 events (ts: 160.770223,
> > 160.770451, 160.773111).
> >
> > [ 160.765623] queue_event nr_events 1
> > [ 160.765623] new event on queue: type=12
> > [ 160.765714] queue_event nr_events 2
> > [ 160.765714] new event on queue: type=3
> > [ 160.765822] queue_event nr_events 3
> > [ 160.765822] new event on queue: type=10 ==> MMAP2 event
> > [ 160.766180] queue_event nr_events 4
> > [ 160.766180] new event on queue: type=14
> > [ 160.767623] queue_event nr_events 5
> > [ 160.767623] new event on queue: type=11 ==> AUX event
> > [ 160.769710] queue_event nr_events 6
> > [ 160.769710] new event on queue: type=12
> > [ 160.769762] queue_event nr_events 7
> > [ 160.769762] new event on queue: type=14
> > [ 160.769810] queue_event nr_events 8
> > [ 160.769810] new event on queue: type=14
> > [ 160.769943] queue_event nr_events 9
> > [ 160.769943] new event on queue: type=11 ==> AUX event
> > [ 160.770028] queue_event nr_events 10
> > [ 160.770028] new event on queue: type=12
> > [ 160.770073] queue_event nr_events 11
> > [ 160.770073] new event on queue: type=14
> > [ 160.770223] queue_event nr_events 12
> > [ 160.770223] new event on queue: type=10 ==> MMAP2 event
> > [ 160.770451] queue_event nr_events 13
> > [ 160.770451] new event on queue: type=10 ==> MMAP2 event
> > [ 160.770628] queue_event nr_events 14
> > [ 160.770628] new event on queue: type=14
> > [ 160.771650] queue_event nr_events 15
> > [ 160.771650] new event on queue: type=11 ==> AUX event
> > [ 160.771752] queue_event nr_events 16
> > [ 160.771752] new event on queue: type=12
> > [ 160.771798] queue_event nr_events 17
> > [ 160.771798] new event on queue: type=14
> > [ 160.773111] queue_event nr_events 18
> > [ 160.773111] new event on queue: type=10 ==> MMAP2 event
> > [ 160.782613] queue_event nr_events 19
> > [ 160.782613] new event on queue: type=14
> >
> > Thanks for the reviewing,
> >
> > Leo
> >
>
> When you say AUX event, do you mean PERF_RECORD_AUX or PERF_RECORD_AUXTRACE?

The AUX event is PERF_RECORD_AUX.

> The kernel creates PERF_RECORD_AUX and the data range aux_offset/aux_size
> should be for things prior to the sample time.
>
> perf tool creates PERF_RECORD_AUXTRACE when copying data out of the aux
> area. PERF_RECORD_AUXTRACE does not have a timestamp and can contain data
> corresponding to several PERF_RECORD_AUX. Data is queued based on
> PERF_RECORD_AUXTRACE because that is what the data is attached to i.e. one
> buffer can contain data from several PERF_RECORD_AUX events.
>
> If you are processing data based on PERF_RECORD_AUX timestamp then you need
> to pay attention to the offset. PERF_RECORD_AUX gives you
> aux_offset/aux_size and auxtrace_buffer (which may contain data from several
> PERF_RECORD_AUX) gives you offset/size.

Yeah, as you suggested, in this case the key point is for the first
PERF_RECORD_AUX event handling, in theory it should contain very short
trace data and exit the decoding quickly. The issue is the first
PERF_RECORD_AUX event will decode all AUX trace data; and near the end
of events handling, the tool finally has chance to process MMAP2 events.

So this RFC patch is not the right way, I will dig more for
PERF_RECORD_AUX event handling for cs-etm.

Thanks for the detailed explanation and suggetions.

Leo

\
 
 \ /
  Last update: 2020-11-19 07:26    [W:0.483 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site