lkml.org 
[lkml]   [2020]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1] Bluetooth: Use NVM files based on SoC ID for WCN3991
Hi Marcel,
On 2020-09-16 19:57, Marcel Holtmann wrote:
> Hi Venkata,
>
>> This change will allow to use different NVM file based
>> on WCN3991 BT SoC ID.Need to use different NVM file based on
>> fab location for WCN3991 BT SoC.
>>
>> Signed-off-by: Venkata Lakshmi Narayana Gubba
>> <gubbaven@codeaurora.org>
>> ---
>> drivers/bluetooth/btqca.c | 41
>> +++++++++++++++++++++++++----------------
>> drivers/bluetooth/btqca.h | 13 ++++++++-----
>> drivers/bluetooth/hci_qca.c | 11 +++++------
>> 3 files changed, 38 insertions(+), 27 deletions(-)
>>
>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>> index ce9dcff..a7e72f1 100644
>> --- a/drivers/bluetooth/btqca.c
>> +++ b/drivers/bluetooth/btqca.c
>> @@ -14,12 +14,11 @@
>>
>> #define VERSION "0.1"
>>
>> -int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
>> +int qca_read_soc_version(struct hci_dev *hdev, struct
>> qca_btsoc_version *ver,
>> enum qca_btsoc_type soc_type)
>> {
>> struct sk_buff *skb;
>> struct edl_event_hdr *edl;
>> - struct qca_btsoc_version *ver;
>> char cmd;
>> int err = 0;
>> u8 event_type = HCI_EV_VENDOR;
>> @@ -70,9 +69,9 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
>> *soc_version,
>> }
>>
>> if (soc_type >= QCA_WCN3991)
>> - memmove(&edl->data, &edl->data[1], sizeof(*ver));
>> -
>> - ver = (struct qca_btsoc_version *)(edl->data);
>> + memcpy(ver, &edl->data[1], sizeof(*ver));
>
> any reason to use &edl->data[1] and not just edl->data + 1?
[Venkata]:
I will use edl->data + 1 and will update in next patchset.
>
>> + else
>> + memcpy(ver, &edl->data, sizeof(*ver));
>>
>> bt_dev_info(hdev, "QCA Product ID :0x%08x",
>> le32_to_cpu(ver->product_id));
>> @@ -83,13 +82,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
>> *soc_version,
>> bt_dev_info(hdev, "QCA Patch Version:0x%08x",
>> le16_to_cpu(ver->patch_ver));
>>
>> - /* QCA chipset version can be decided by patch and SoC
>> - * version, combination with upper 2 bytes from SoC
>> - * and lower 2 bytes from patch will be used.
>> - */
>> - *soc_version = (le32_to_cpu(ver->soc_id) << 16) |
>> - (le16_to_cpu(ver->rom_ver) & 0x0000ffff);
>> - if (*soc_version == 0)
>> + if (le32_to_cpu(ver->soc_id) == 0 || le16_to_cpu(ver->rom_ver) == 0)
>> err = -EILSEQ;
>>
>> out:
>> @@ -446,15 +439,25 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev,
>> const bdaddr_t *bdaddr)
>> EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
>>
>> int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>> - enum qca_btsoc_type soc_type, u32 soc_ver,
>> + enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
>> const char *firmware_name)
>> {
>> struct qca_fw_config config;
>> int err;
>> u8 rom_ver = 0;
>> + u32 soc_ver;
>>
>> bt_dev_dbg(hdev, "QCA setup on UART");
>>
>> + /* QCA chipset version can be decided by patch and SoC
>> + * version, combination with upper 2 bytes from SoC
>> + * and lower 2 bytes from patch will be used.
>> + */
>> + soc_ver = (le32_to_cpu(ver.soc_id) << 16) |
>> + (le16_to_cpu(ver.rom_ver) & 0x0000ffff);
>
> Please indent this properly.
>
[Venkat]:
Sure.I will update in next patchset.
> I am also confused about the 0x0000ffff since it is just 16-bit value
> in the first place. Also where do you want to shift the 32-bit value
> to.
>
> Frankly, I find all this version magic kinda questionable.
>
>> +
>> + bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
>> +
>> config.user_baud_rate = baudrate;
>>
>> /* Download rampatch file */
>> @@ -491,9 +494,15 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t
>> baudrate,
>> if (firmware_name)
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/%s", firmware_name);
>> - else if (qca_is_wcn399x(soc_type))
>> - snprintf(config.fwname, sizeof(config.fwname),
>> - "qca/crnv%02x.bin", rom_ver);
>> + else if (qca_is_wcn399x(soc_type)) {
>> + if (ver.soc_id == QCA_WCN3991_SOC_ID) {
>> + snprintf(config.fwname, sizeof(config.fwname),
>> + "qca/crnv%02xu.bin", rom_ver);
>> + } else {
>> + snprintf(config.fwname, sizeof(config.fwname),
>> + "qca/crnv%02x.bin", rom_ver);
>> + }
>> + }
>> else if (soc_type == QCA_QCA6390)
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/htnv%02x.bin", rom_ver);
>> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
>> index d81b74c..d01a9f5 100644
>> --- a/drivers/bluetooth/btqca.h
>> +++ b/drivers/bluetooth/btqca.h
>> @@ -34,6 +34,8 @@
>> #define QCA_HCI_CC_OPCODE 0xFC00
>> #define QCA_HCI_CC_SUCCESS 0x00
>>
>> +#define QCA_WCN3991_SOC_ID (0x40014320)
>> +
>> enum qca_baudrate {
>> QCA_BAUDRATE_115200 = 0,
>> QCA_BAUDRATE_57600,
>> @@ -136,9 +138,9 @@ enum qca_btsoc_type {
>>
>> int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
>> int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>> - enum qca_btsoc_type soc_type, u32 soc_ver,
>> + enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
>> const char *firmware_name);
>> -int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
>> +int qca_read_soc_version(struct hci_dev *hdev, struct
>> qca_btsoc_version *ver,
>> enum qca_btsoc_type);
>> int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
>> int qca_send_pre_shutdown_cmd(struct hci_dev *hdev);
>> @@ -155,13 +157,14 @@ static inline int qca_set_bdaddr_rome(struct
>> hci_dev *hdev, const bdaddr_t *bdad
>> }
>>
>> static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t
>> baudrate,
>> - enum qca_btsoc_type soc_type, u32 soc_ver,
>> - const char *firmware_name)
>> + enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
>> + const char *firmware_name)
>
> Please use proper indentation.
>
[Venkat]:
Sure.I will update in next patchset.
>> {
>> return -EOPNOTSUPP;
>> }
>>
>> -static inline int qca_read_soc_version(struct hci_dev *hdev, u32
>> *soc_version,
>> +static inline int qca_read_soc_version(struct hci_dev *hdev,
>> + struct qca_btsoc_version *ver,
>> enum qca_btsoc_type)
>> {
>> return -EOPNOTSUPP;
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index 244b8fe..4c32c60 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -1649,7 +1649,7 @@ static int qca_setup(struct hci_uart *hu)
>> enum qca_btsoc_type soc_type = qca_soc_type(hu);
>> const char *firmware_name = qca_get_firmware_name(hu);
>> int ret;
>> - int soc_ver = 0;
>> + struct qca_btsoc_version ver;
>>
>> ret = qca_check_speeds(hu);
>> if (ret)
>> @@ -1678,7 +1678,7 @@ static int qca_setup(struct hci_uart *hu)
>> if (qca_is_wcn399x(soc_type)) {
>> set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
>>
>> - ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
>> + ret = qca_read_soc_version(hdev, &ver, soc_type);
>> if (ret)
>> return ret;
>> } else {
>> @@ -1697,15 +1697,14 @@ static int qca_setup(struct hci_uart *hu)
>>
>> if (!qca_is_wcn399x(soc_type)) {
>> /* Get QCA version information */
>> - ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
>> + ret = qca_read_soc_version(hdev, &ver, soc_type);
>> if (ret)
>> return ret;
>> }
>>
>> - bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
>> /* Setup patch / NVM configurations */
>> - ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver,
>> - firmware_name);
>> + ret = qca_uart_setup(hdev, qca_baudrate, soc_type, ver,
>> + firmware_name);
>> if (!ret) {
>> set_bit(QCA_IBS_ENABLED, &qca->flags);
>> qca_debugfs_init(hdev);
>
> Regards
>
> Marcel

\
 
 \ /
  Last update: 2020-11-19 13:54    [W:0.196 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site