lkml.org 
[lkml]   [2020]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] pwm: pca9685: Set full OFF bits in probe
Date
The full OFF bits are set by default in the PCA9685 LEDn_OFF_H
registers at POR. LEDn_ON_L/H and LEDn_OFF_L default to 0.

The datasheet states that LEDn_OFF and LEDn_ON should never be both set
to the same values.

This patch removes the clearing of the full OFF bit in the probe
function. We still clear the rest of the OFF regs but now we set the
full OFF bit to avoid having both OFF and ON registers set to 0 and
start up in a safe default state.

Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
---
drivers/pwm/pwm-pca9685.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c
index 20f1314e6754..88028222335f 100644
--- a/drivers/pwm/pwm-pca9685.c
+++ b/drivers/pwm/pwm-pca9685.c
@@ -499,9 +499,9 @@ static int pca9685_pwm_probe(struct i2c_client *client,
reg &= ~(MODE1_ALLCALL | MODE1_SUB1 | MODE1_SUB2 | MODE1_SUB3);
regmap_write(pca->regmap, PCA9685_MODE1, reg);

- /* Clear all "full off" bits */
+ /* Reset OFF registers to HW default (only full OFF bit is set) */
regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_L, 0);
- regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_H, 0);
+ regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_H, LED_FULL);

pca->chip.ops = &pca9685_pwm_ops;
/* Add an extra channel for ALL_LED */
--
2.29.2
\
 
 \ /
  Last update: 2020-11-18 18:46    [W:0.120 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site