lkml.org 
[lkml]   [2020]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] mmc: sdhci-of-arasan: Add pinctrl support to the driver
Date


On 18. 11. 20 7:21, Manish Narani wrote:
> Driver should be able to handle optional pinctrl setting.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> Signed-off-by: Manish Narani <manish.narani@xilinx.com>
> ---
> drivers/mmc/host/sdhci-of-arasan.c | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
> index 829ccef87426..f788cc9d5914 100644
> --- a/drivers/mmc/host/sdhci-of-arasan.c
> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> @@ -23,6 +23,7 @@
> #include <linux/regmap.h>
> #include <linux/of.h>
> #include <linux/firmware/xlnx-zynqmp.h>
> +#include <linux/pinctrl/consumer.h>
>
> #include "cqhci.h"
> #include "sdhci-pltfm.h"
> @@ -135,6 +136,8 @@ struct sdhci_arasan_clk_data {
> * @clk_ops: Struct for the Arasan Controller Clock Operations.
> * @soc_ctl_base: Pointer to regmap for syscon for soc_ctl registers.
> * @soc_ctl_map: Map to get offsets into soc_ctl registers.
> + * @pinctrl: Per-device pin control state holder.
> + * @pins_default: Pinctrl state for a device.
> * @quirks: Arasan deviations from spec.
> */
> struct sdhci_arasan_data {
> @@ -149,6 +152,8 @@ struct sdhci_arasan_data {
>
> struct regmap *soc_ctl_base;
> const struct sdhci_arasan_soc_ctl_map *soc_ctl_map;
> + struct pinctrl *pinctrl;
> + struct pinctrl_state *pins_default;
> unsigned int quirks;
>
> /* Controller does not have CD wired and will not function normally without */
> @@ -1619,6 +1624,25 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
> goto unreg_clk;
> }
>
> + sdhci_arasan->pinctrl = devm_pinctrl_get(&pdev->dev);
> + if (!IS_ERR(sdhci_arasan->pinctrl)) {
> + sdhci_arasan->pins_default =
> + pinctrl_lookup_state(sdhci_arasan->pinctrl,
> + PINCTRL_STATE_DEFAULT);
> + if (IS_ERR(sdhci_arasan->pins_default)) {
> + dev_err(&pdev->dev, "Missing default pinctrl config\n");
> + ret = PTR_ERR(sdhci_arasan->pins_default);
> + goto unreg_clk;
> + }
> +
> + ret = pinctrl_select_state(sdhci_arasan->pinctrl,
> + sdhci_arasan->pins_default);
> + if (ret) {
> + dev_err(&pdev->dev, "could not select default state\n");
> + goto unreg_clk;
> + }
> + }
> +
> sdhci_arasan->phy = ERR_PTR(-ENODEV);
> if (of_device_is_compatible(pdev->dev.of_node,
> "arasan,sdhci-5.1")) {
>

Ulf: Is there any need to describe in binding doc? I mean all txt based
binding have it described. But not quite sure if there is a need to
describe it in yaml if only default option is supported.
And when this is optional it should be fine also for others SOC.

For patch itself.

Acked-by: Michal Simek <michal.simek@xilinx.com>

Thanks,
Michal

\
 
 \ /
  Last update: 2020-11-18 14:50    [W:0.056 / U:1.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site