lkml.org 
[lkml]   [2020]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 0/8] media: i2c: Add RDACM21 camera module
From
Date
Hi Jacopo,

On 16/11/2020 13:52, Jacopo Mondi wrote:
> Hello,
> this v5 mostly changes how the rdacm21 driver handles writes to the
> OV490 chip by handling the 'high' part of the sensor register through an
> helper function as suggested by Kieran and Laurent.
>
> The diff is available at:
> https://paste.debian.net/1172700/
>
> Minor fixes in patches subjects and in bindings as reported by Sergei and
> Kieran.
>
> Bindings have now been sent to DT people now that they've been reviewed
> by Kieran.
>
> v4: https://patchwork.linuxtv.org/project/linux-media/list/?series=3847
> v3: https://patchwork.linuxtv.org/project/linux-media/list/?series=3657
>
> Background in v1 cover letter:
> https://www.spinics.net/lists/linux-renesas-soc/msg52886.html
>
> I have tested on Eagle V3M with 4 RDACM21, but the whole point of
> this series is to retain compatibility with RDACM20.
>
> For this reason I have included 2 patches on top, not intended for merge
> that re-propose DTS support for the MAXIM max9286 expansion board connected
> to Salvator-X and add the newly introduced property to the DTS file.
>
> Kieran, I know you have a working setup with RDACM20, the final patches are
> meant for ease your testing. Can you give this series a spin ?


After some rabbit-holes :-D:

A 5-camera capture on Salvator-X - https://pasteboard.co/JAW0PSr.png
For this series, on both Eagle-V3M and Salvator-X

Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>



> Series based on latest renesas-drivers tag: renesas-drivers-2020-11-10-v5.10-rc3
>
> Thanks
> j
>
> Jacopo Mondi (7):
> media: i2c: Add driver for RDACM21 camera module
> dt-bindings: media: max9286: Document
> 'maxim,initial-reverse-channel-mV'
> media: i2c: max9286: Break-out reverse channel setup
> media: i2c: max9286: Make channel amplitude programmable
> media: i2c: max9286: Configure reverse channel amplitude
> [DNI] arm64: dts: renesas: salvator-x-max9286: Specify channel
> amplitude
> [DNI] arm64: dts: renesas: eagle: Specify channel amplitude
>
> Laurent Pinchart (1):
> arm64: dts: renesas: salvator-x: Add MAX9286 expansion board
>
> .../bindings/media/i2c/maxim,max9286.yaml | 23 +
> MAINTAINERS | 12 +
> .../arm64/boot/dts/renesas/r8a77970-eagle.dts | 1 +
> .../boot/dts/renesas/salvator-x-max9286.dtsi | 396 ++++++++++++
> drivers/media/i2c/Kconfig | 13 +
> drivers/media/i2c/Makefile | 2 +
> drivers/media/i2c/max9286.c | 58 +-
> drivers/media/i2c/rdacm21.c | 595 ++++++++++++++++++
> 8 files changed, 1087 insertions(+), 13 deletions(-)
> create mode 100644 arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi
> create mode 100644 drivers/media/i2c/rdacm21.c
>
> --
> 2.29.1
>

\
 
 \ /
  Last update: 2020-11-18 14:36    [W:0.115 / U:1.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site