lkml.org 
[lkml]   [2020]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 2/6] drm/panel: mantix: Tweak init sequence
Date
We've seen some (non permanent) burn in and bad white balance
on some of the panels. Adding this bit from a vendor supplied
sequence fixes it.

Fixes: 72967d5616d3 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
index 0c5f22e95c2d..624d17b96a69 100644
--- a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
+++ b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
@@ -22,6 +22,7 @@
/* Manufacturer specific Commands send via DSI */
#define MANTIX_CMD_OTP_STOP_RELOAD_MIPI 0x41
#define MANTIX_CMD_INT_CANCEL 0x4C
+#define MANTIX_CMD_SPI_FINISH 0x90

struct mantix {
struct device *dev;
@@ -66,6 +67,10 @@ static int mantix_init_sequence(struct mantix *ctx)
dsi_generic_write_seq(dsi, 0x80, 0x64, 0x00, 0x64, 0x00, 0x00);
msleep(20);

+ dsi_generic_write_seq(dsi, MANTIX_CMD_SPI_FINISH, 0xA5);
+ dsi_generic_write_seq(dsi, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x00, 0x2F);
+ msleep(20);
+
dev_dbg(dev, "Panel init sequence done\n");
return 0;
}
--
2.29.2
\
 
 \ /
  Last update: 2020-11-17 18:50    [W:0.096 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site