lkml.org 
[lkml]   [2020]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] unlz4: Handle 0-size chunks, discard trailing padding/garbage
On Mon, Nov 16, 2020 at 05:09:59PM -0500, siarhei.liakh@concurrent-rt.com wrote:
> From: Siarhei Liakh <siarhei.liakh@concurrent-rt.com>
>
> TL;DR:
>
> There are two places in unlz4() function where reads beyond the end of a buffer
> might happen under certain conditions which had been observed in real life on
> stock Ubuntu 20.04 x86_64 with several vanilla mainline kernels, including 5.10.
> As a result of this issue, the kernel fails to decompress LZ4-compressed
> initramfs with following message showing up in the logs:
>
> initramfs unpacking failed: Decoding failed
>
> Note that in most cases the affected system is still able to proceed with the
> boot process to completion.
>
> LONG STORY:
>
> Background.
>
> Not so long ago we've noticed that some of our Ubuntu 20.04 x86_64 test systems
> often fail to boot newly generated initramfs image. After extensive
> investigation we determined that a failure required the following combination
> for our 5.4.66-rt38 kernel with some additional custom patches:
>
> Real x86_64 hardware or QEMU
> UEFI boot
> Ubunutu 20.04 (or 20.04.1) x86_64
> CONFIG_BLK_DEV_RAM=y in .config
> COMPRESS=lz4 in initramfs.conf
> Freshly compiled and installed kernel
> Freshly generated and installed initramfs image
>
> In our testing, such a combination would often produce a non-bootable system. It
> is important to note that [un]bootability of the system was later tracked down
> to particular instances of initramfs images, and would follow them if they were
> to be switched around/transferred to other systems. What is even more important
> is that consecutive re-generations of initramfs images from the same source and
> binary materials would yield about 75% of "bad" images. Further, once the image
> is identified as "bad",it always stays "bad"; once one is "good" it always stays
> "good". Reverting CONFIG_BLK_DEV_RAM to "m" (default in Ubuntu), or changing
> COMPRESS to "gzip" yields a 100% bootable system. Decompressing "bad" initramfs
> image with "unmkinitramfs" yields *exactly* the same set of binaries, as
> verified by matching MD5 sums to those from "good" image.
>
> Speculation.
>
> Based on general observations, it appears that Ubuntu's userland toolchain
> cannot consistently generate exactly the same compressed initramfs image, likely
> due to some variations in timestamps between the runs. This causes variations in
> compressed lz4 data stream. Further, either initramfs tools or lz4 libraries
> appear to pad compressed lz4 output to closest 4-byte boundary. lz4 v1.9.2 that
> ships with Ubuntu 20.04 appears to be able to handle such padding just fine,
> while lz4 (supposedly v1.8.3) within Linux kernel cannot.
> Several reports of somewhat similar behavior had been recently circulation
> through different bug tracking systems and discussion forums [1-4].
> I also suspect only that systems which can mount permanent root directly (or
> with help of modules contained in first, supposedly uncompressed, part of
> initramfs, or the ones with statically linked modules) can actually complete the
> boot when LZ4 decompression fails. This would certainly explain why most of
> Ubuntu systems still manage to boot even after failing to decompress the image.
>
> The facts.
>
> Regardless of whether Ubuntu 20.04 toolchain produces a valid lz4-compressed
> initramfs image or not, current version of unlz4() function in kernel has two
> code paths which had been observed attempting to read beyond the buffer end when
> presented with one of the "padded"/"bad" initramfs images generated by stock
> Ubuntu 20.04 toolchain. Some configurations of some 5.4 kernels are known to
> fail to boot in such cases. This behavior also becomes evident on vanilla
> 5.10.0-rc3 and 5.10.0-rc4 kernels with addition of two logging statements for
> corresponding edge cases, even though it does not prevent system from booting in
> most generic configurations.
>
> Further investigation is likely warranted to confirm whether userland toolchain
> contains any bugs and/or whether any of these cases constitute violation of LZ4
> and/or initramfs specification.
>
> References
>
> [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1835660
> [2] https://github.com/linuxmint/mint20-beta/issues/90
> [3] https://askubuntu.com/questions/1245458/getting-the-message-0-283078-initramfs-unpacking-failed-decoding-failed-wh
> [4] https://forums.linuxmint.com/viewtopic.php?t=323152
>
> Signed-off-by: Siarhei Liakh <siarhei.liakh@concurrent-rt.com>
>
> ---
>
> Please CC: me directly on all replies.
>
> lib/decompress_unlz4.c | 29 +++++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)

<formletter>

This is not the correct way to submit patches for inclusion in the
stable kernel tree. Please read:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.

</formletter>

\
 
 \ /
  Last update: 2020-11-17 10:13    [W:0.039 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site