lkml.org 
[lkml]   [2020]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/6] bus: mhi: core: Add support to stop or start channel data transfers
On Wed, Nov 11, 2020 at 11:21:10AM -0800, Bhaumik Bhatt wrote:
> Some MHI client drivers may want to request a pause or halt of
> data transfer activity on their channels. Support for this does
> not exist and must be introduced, wherein the channel context is
> not reset or cleared but only the STOP channel command is issued.
> This would need to be paired with an API that allows resuming the
> data transfer activity on channels by use of the START channel
> command. This API assumes that the context information is already
> setup. Enable this using two new APIs, mhi_start_transfer() and
> mhi_stop_transfer().
>
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> ---
> drivers/bus/mhi/core/main.c | 41 +++++++++++++++++++++++++++++++++++++++++
> include/linux/mhi.h | 19 +++++++++++++++++++
> 2 files changed, 60 insertions(+)
>
> diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> index 1226933..1a969f4 100644
> --- a/drivers/bus/mhi/core/main.c
> +++ b/drivers/bus/mhi/core/main.c
> @@ -1560,6 +1560,47 @@ void mhi_unprepare_from_transfer(struct mhi_device *mhi_dev)
> }
> EXPORT_SYMBOL_GPL(mhi_unprepare_from_transfer);
>
> +static int mhi_update_transfer_state(struct mhi_device *mhi_dev,
> + enum mhi_ch_state_type to_state)
> +{
> + struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
> + struct mhi_chan *mhi_chan;
> + int dir, ret;
> +
> + for (dir = 0; dir < 2; dir++) {
> + mhi_chan = dir ? mhi_dev->ul_chan : mhi_dev->dl_chan;
> +
> + if (!mhi_chan)
> + continue;
> +
> + /*
> + * Bail out if one of the channels fail as client will reset
> + * both upon failure
> + */
> + mutex_lock(&mhi_chan->mutex);

Hmm. The documentation about wait_for_completion*() used in
mhi_update_channel_state()says below,

"As all variants of wait_for_completion() can (obviously) block for a long
time depending on the nature of the activity they are waiting for, so in
most cases you probably don't want to call this with held mutexes."

> + ret = mhi_update_channel_state(mhi_cntrl, mhi_chan, to_state);
> + if (ret) {
> + mutex_unlock(&mhi_chan->mutex);
> + return ret;
> + }
> + mutex_unlock(&mhi_chan->mutex);
> + }
> +
> + return 0;
> +}
> +
> +int mhi_stop_transfer(struct mhi_device *mhi_dev)
> +{
> + return mhi_update_transfer_state(mhi_dev, MHI_CH_STATE_TYPE_STOP);
> +}
> +EXPORT_SYMBOL_GPL(mhi_stop_transfer);
> +
> +int mhi_start_transfer(struct mhi_device *mhi_dev)
> +{
> + return mhi_update_transfer_state(mhi_dev, MHI_CH_STATE_TYPE_START);
> +}
> +EXPORT_SYMBOL_GPL(mhi_start_transfer);
> +
> int mhi_poll(struct mhi_device *mhi_dev, u32 budget)
> {
> struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
> diff --git a/include/linux/mhi.h b/include/linux/mhi.h
> index 52b3c60..aee8494 100644
> --- a/include/linux/mhi.h
> +++ b/include/linux/mhi.h
> @@ -702,6 +702,25 @@ int mhi_prepare_for_transfer(struct mhi_device *mhi_dev);
> void mhi_unprepare_from_transfer(struct mhi_device *mhi_dev);
>
> /**
> + * mhi_stop_transfer - Pauses ongoing channel activity by issuing the STOP
> + * channel command to both UL and DL channels. This command
> + * does not reset the channel context and the client drivers
> + * can issue mhi_start_transfer to resume activity.
> + * @mhi_dev: Device associated with the channels
> + */
> +int mhi_stop_transfer(struct mhi_device *mhi_dev);
> +
> +/**
> + * mhi_start_transfer - Resumes channel activity by issuing the START channel
> + * command to both UL and DL channels. This command assumes
> + * the channel context is already setup and the client
> + * drivers can issue mhi_stop_transfer to pause activity if
> + * required.
> + * @mhi_dev: Device associated with the channels
> + */
> +int mhi_start_transfer(struct mhi_device *mhi_dev);
> +
> +/**

Align the comment header properly.

Thanks,
Mani

> * mhi_poll - Poll for any available data in DL direction
> * @mhi_dev: Device associated with the channels
> * @budget: # of events to process
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>

\
 
 \ /
  Last update: 2020-11-16 13:46    [W:0.155 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site