lkml.org 
[lkml]   [2020]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1] clk: tegra30: Use 300MHz for video decoder by default
From
Date
15.11.2020 00:16, Stephen Boyd пишет:
> Quoting Dmitry Osipenko (2020-11-04 05:48:10)
>> The 600MHz is a too high clock rate for some SoC versions for the video
>> decoder hardware and this may cause stability issues. Use 300MHz for the
>> video decoder by default, which is supported by all hardware versions.
>>
>> Fixes: ed1a2459e20c ("clk: tegra: Add Tegra20/30 EMC clock implementation")
>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>> ---
>
> Should this go to clk-fixes? Thierry?
>

Either way should be good. The fix isn't critical because 600MHz seems
to be working okay on unsupported hardware.

Potentially this could vary depending on a board, but then I don't think
that there are actively-supported boards which would notice this change.

Likely that this patch will be backported by a bot anyways because of
the fixes tag.

\
 
 \ /
  Last update: 2020-11-15 15:11    [W:0.062 / U:0.748 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site