lkml.org 
[lkml]   [2020]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v12 4/4] gpio: xilinx: Utilize generic bitmap_get_value and _set_value
On Wed, Nov 11, 2020 at 3:30 AM Syed Nayyar Waris <syednwaris@gmail.com> wrote:
>
> On Tue, Nov 10, 2020 at 12:43:16PM -0500, William Breathitt Gray wrote:
> > On Tue, Nov 10, 2020 at 10:52:42PM +0530, Syed Nayyar Waris wrote:
> > > On Tue, Nov 10, 2020 at 6:05 PM William Breathitt Gray
> > > <vilhelm.gray@gmail.com> wrote:
> > > >
> > > > On Tue, Nov 10, 2020 at 11:02:43AM +0100, Michal Simek wrote:
> > > > >
> > > > >
> > > > > On 09. 11. 20 18:31, William Breathitt Gray wrote:
> > > > > > On Mon, Nov 09, 2020 at 07:22:20PM +0200, Andy Shevchenko wrote:
> > > > > >> On Mon, Nov 09, 2020 at 12:11:40PM -0500, William Breathitt Gray wrote:
> > > > > >>> On Mon, Nov 09, 2020 at 10:15:29PM +0530, Syed Nayyar Waris wrote:
> > > > > >>>> On Mon, Nov 09, 2020 at 03:41:53PM +0100, Arnd Bergmann wrote:
> > > > > >>
> > > > > >> ...
> > > > > >>
> > > > > >>>> static inline void bitmap_set_value(unsigned long *map,
> > > > > >>>> - unsigned long value,
> > > > > >>>> + unsigned long value, const size_t length,
> > > > > >>>> unsigned long start, unsigned long nbits)
> > > > > >>>> {
> > > > > >>>> const size_t index = BIT_WORD(start);
> > > > > >>>> @@ -15,6 +15,10 @@ static inline void bitmap_set_value(unsigned long *map,
> > > > > >>>> } else {
> > > > > >>>> map[index + 0] &= ~BITMAP_FIRST_WORD_MASK(start);
> > > > > >>>> map[index + 0] |= value << offset;
> > > > > >>>> +
> > > > > >>>> + if (index + 1 >= length)
> > > > > >>>> + __builtin_unreachable();
> > > > > >>>> +
> > > > > >>>> map[index + 1] &= ~BITMAP_LAST_WORD_MASK(start + nbits);
> > > > > >>>> map[index + 1] |= value >> space;
> > > > > >>>> }
> > > > > >>>
> > > > > >>> Hi Syed,
> > > > > >>>
> > > > > >>> Let's rename 'length' to 'nbits' as Arnd suggested, and rename 'nbits'
> > > > > >>> to value_width.
> > > > > >>
> > > > > >> length here is in longs. I guess this is the point of entire patch.
> > > > > >
> > > > > > Ah yes, this should become 'const unsigned long nbits' and represent the
> > > > > > length of the bitmap in bits and not longs.
> > >
> > > Hi William, Andy and All,
> > >
> > > Thank You for reviewing. I was looking into the review comments and I
> > > have a question on the above.
> > >
> > > Actually, in bitmap_set_value(), the intended comparison is to be made
> > > between 'index + 1' and 'length' (which is now renamed as 'nbits').
> > > That is, the comparison would look-like as follows:
> > > if (index + 1 >= nbits)
> > >
> > > The 'index' is getting populated with BIT_WORD(start).
> > > The 'index' variable in above is the actual index of the bitmap array,
> > > while in previous mail it is suggested to use 'nbits' which represent
> > > the length of the bitmap in bits and not longs.
> > >
> > > Isn't it comparing two different things? index of array (not the
> > > bit-wise-length) on left hand side and nbits (bit-wise-length) on
> > > right hand side?
> > >
> > > Have I misunderstood something? If yes, request to clarify.
> > >
> > > Or do I have to first divide 'nbits' by BITS_PER_LONG and then compare
> > > it with 'index + 1'? Something like this?
> > >
> > > Regards
> > > Syed Nayyar Waris
> >
> > The array elements of the bitmap memory region are abstracted away for
> > the covenience of the users of the bitmap_* functions; the driver
> > authors are able to treat their bitmaps as just a set of contiguous bits
> > and not worry about where the division between array elements happen.
> >
> > So to match the interface of the other bitmap_* functions, you should
> > take in nbits and figure out the actual array length by dividing by
> > BITS_PER_LONG inside bitmap_set_value(). Then you can use your
> > conditional check (index + 1 >= length) like you have been doing so far.
> >
> > William Breathitt Gray
>
> Hi Arnd,
>
> Sharing a new version of bitmap_set_value(). Let me know if it looks
> good and whether it suppresses the compiler warning.
>
> The below patch is created against the v12 version of bitmap_set_value().
>
> -static inline void bitmap_set_value(unsigned long *map,
> - unsigned long value,
> - unsigned long start, unsigned long nbits)
> +static inline void bitmap_set_value(unsigned long *map, unsigned long nbits,
> + unsigned long value, unsigned long value_width,
> + unsigned long start)
> {
> - const size_t index = BIT_WORD(start);
> + const unsigned long index = BIT_WORD(start);
> + const unsigned long length = BIT_WORD(nbits);
> const unsigned long offset = start % BITS_PER_LONG;
> const unsigned long ceiling = round_up(start + 1, BITS_PER_LONG);
> const unsigned long space = ceiling - start;
>
> - value &= GENMASK(nbits - 1, 0);
> + value &= GENMASK(value_width - 1, 0);
>
> - if (space >= nbits) {
> - map[index] &= ~(GENMASK(nbits - 1, 0) << offset);
> + if (space >= value_width) {
> + map[index] &= ~(GENMASK(value_width - 1, 0) << offset);
> map[index] |= value << offset;
> } else {
> map[index + 0] &= ~BITMAP_FIRST_WORD_MASK(start);
> map[index + 0] |= value << offset;
> - map[index + 1] &= ~BITMAP_LAST_WORD_MASK(start + nbits);
> +
> + if (index + 1 >= length)
> + __builtin_unreachable();
> +
> + map[index + 1] &= ~BITMAP_LAST_WORD_MASK(start + value_width);
> map[index + 1] |= value >> space;
> }
> }
>
>

Hi Arnd,

What do you think of the above solution ( new version of
bitmap_set_value() )? Does it look good?

Regards
Syed Nayyar Waris

\
 
 \ /
  Last update: 2020-11-13 17:53    [W:0.244 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site