lkml.org 
[lkml]   [2020]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 8/8] rpmsg: Turn name service into a stand alone driver
From
Date


On 11/11/20 1:37 AM, Mathieu Poirier wrote:
> On Tue, 10 Nov 2020 at 11:18, Arnaud POULIQUEN <arnaud.pouliquen@st.com> wrote:
>>
>> Hi Mathieu, Guennadi,
>>
>> On 11/9/20 6:55 PM, Mathieu Poirier wrote:
>>> On Mon, Nov 09, 2020 at 11:20:24AM +0100, Guennadi Liakhovetski wrote:
>>>> Hi Arnaud,
>>>>
>>>> On Mon, Nov 09, 2020 at 09:48:37AM +0100, Arnaud POULIQUEN wrote:
>>>>> Hi Guennadi, Mathieu,
>>>>>
>>>>> On 11/6/20 6:53 PM, Mathieu Poirier wrote:
>>>>>> On Fri, Nov 06, 2020 at 03:00:28PM +0100, Guennadi Liakhovetski wrote:
>>>>>>> On Fri, Nov 06, 2020 at 02:15:45PM +0100, Guennadi Liakhovetski wrote:
>>>>>>>> Hi Mathieu, Arnaud,
>>>>>>>>
>>>>>>>> On Thu, Nov 05, 2020 at 03:50:28PM -0700, Mathieu Poirier wrote:
>>>>>>>>> From: Arnaud Pouliquen <arnaud.pouliquen@st.com>
>>>>>>>>>
>>>>>>>>> Make the RPMSG name service announcement a stand alone driver so that it
>>>>>>>>> can be reused by other subsystems. It is also the first step in making the
>>>>>>>>> functionatlity transport independent, i.e that is not tied to virtIO.
>>>>>>>>
>>>>>>>> Sorry, I just realised that my testing was incomplete. I haven't tested
>>>>>>>> automatic module loading and indeed it doesn't work. If rpmsg_ns is loaded
>>>>>>>> it probes and it's working, but if it isn't loaded and instead the rpmsg
>>>>>>>> bus driver is probed (e.g. virtio_rpmsg_bus), calling
>>>>>>>> rpmsg_ns_register_device() to create a new rpmsg_ns device doesn't cause
>>>>>>>> rpmsg_ns to be loaded.
>>>>>>>
>>>>>>> A simple fix for that is using MODULE_ALIAS("rpmsg:rpmsg_ns"); in rpmsg_ns.c
>>>>>>> but that alone doesn't fix the problem completely - the module does load then
>>>>>>> but not quickly enough, the NS announcement from the host / remote arrives
>>>>>>> before rpmsg_ns has properly registered. I think the best solution would be
>>>>>>> to link rpmsg_ns.c together with rpmsg_core.c. You'll probably want to keep
>>>>>>> the module name, so you could rename them to just core.c and ns.c.
>>>>>>
>>>>>> I'm pretty sure it is because virtio_device_ready() in rpmsg_probe() is called
>>>>>> before the kernel has finished loading the name space driver. There has to be
>>>>>> a way to prevent that from happening - I will investigate further.
>>>>>
>>>>> Right, no dependency is set so the rpmsg_ns driver is never probed...
>>>>> And name service announcement messages are dropped if the service is not present.
>>>>
>>>> The mentioned change
>>>>
>>>> -MODULE_ALIAS("rpmsg_ns");
>>>> +MODULE_ALIAS("rpmsg:rpmsg_ns");
>>>
>>> Yes, I'm good with that part.
>>>
>>>>
>>>> is actually a compulsory fix, without it the driver doesn't even get loaded when
>>>> a device id registered, using rpmsg_ns_register_device(). So this has to be done
>>>> as a minimum *if* we keep RPNsg NS as a separate kernel module. However, that
>>>> still doesn't fix the problem relyably because of timing. I've merged both the
>>>> RPMsg core and NS into a single module, which fixed the issue for me. I'm
>>>> appending a patch to this email, but since it's a "fixup" please, feel free to
>>>> roll it into the original work. But thinking about it, even linking modules
>>>> together doesn't guarantee the order. I think rpmsg_ns_register_device() should
>>>> actually actively wait for NS device probing to finish - successfully or not.
>>>> I can add a complete() / wait_for_completion() pair to the process if you like.
>>>>
>>>
>>> Working with a completion is the kind of thing I had in mind. But I would still
>>> like to keep the drivers separate and that's the part I need to think about.
>>
>> I reproduce the problem: the rpmsg_ns might not be probed on first message reception.
>> What makes the fix not simple is that the virtio forces the virtio status to ready
>> after the probe of the virtio unit [1].
>> Set this status tiggs the remote processor first messages.
>>
>> [1]https://elixir.bootlin.com/linux/latest/source/drivers/virtio/virtio.c#L253
>>
>> Guennadi: I'm not sure that your patch will solve the problem , look like it just reduces the
>> delay between the rpmsg_virtio and the rpmsg_ns probe (the module loading time is saved)
>>
>> Based on my observations, I can see two alternatives.
>> - rpmsg_ns.c is no longer an rpmsg driver but a kind of function library to manage a generic name service.
>
> That option joins Guennadi's vision - I think he just expressed it in
> a different way. The more I think about it, the more I find that
> option appealing. With the code separation already achieved in this
> patchset it wouldn't be hard to implement.

Right, similar to Guennadi's version, if we want to keep it simpler this is
probably the preferred option.
From my point of view the main requierement is that the ns announcement service
is generic.


>
>> - we implement a completion as proposed by Mathieu.
>>
>> I tried this second solution based on the component bind mechanism.
>> I added the patch at the end of the mail (the patch is a POC, so not ready for upstream).
>> Maybe something simpler is possible. I'm just keeping in mind that we may have to add similar
>> services in the future.
>>
>
> Wasn't familiar with the "component" infrastructure - I suppose you
> stumbled on it while working on sound drivers. I have to spend more
> time looking at it.

Used in DRM framework mainly, i implemented this in my RFC[1] concerning the
refactoring of the rproc_virtio in a platform driver. The idea was to ensure
that all rproc sub-devices are registered before starting the remote processor.

[1]https://lkml.org/lkml/2020/4/16/1817

The principle it to attach child components to a master component, this
relationship allows to synchronize all using component_master_add_with_match
and component_bind_all after the drivers probing step.
The drawback of this solution is that it make code more complex.

> But if you have time and want to spin off a new
> revision that implements the library concept, I'll invest time on that
> instead.

Time is always a major issue :)
No time this week, but i will try to send patches next week.

Regards,
Arnaud

>
>> Regards,
>> Arnaud
>>
>> From f2de77027f4a3836f8bf46aa257e5592af6529b7 Mon Sep 17 00:00:00 2001
>> From: Arnaud Pouliquen <arnaud.pouliquen@st.com>
>> Date: Tue, 10 Nov 2020 18:39:29 +0100
>> Subject: [PATCH] rpmsg_ns: add synchronization based on component mechanism
>>
>> Implement the component bind mechanism to ensure that the rpmsg virtio bus
>> driver are probed before treating the first RPMsg.
>>
>> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
>> ---
>> drivers/rpmsg/rpmsg_ns.c | 26 ++++++++++++-
>> drivers/rpmsg/virtio_rpmsg_bus.c | 65 ++++++++++++++++++++++++++++++++
>> 2 files changed, 89 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/rpmsg/rpmsg_ns.c b/drivers/rpmsg/rpmsg_ns.c
>> index 5bda7cb44618..057e5d1d29a0 100644
>> --- a/drivers/rpmsg/rpmsg_ns.c
>> +++ b/drivers/rpmsg/rpmsg_ns.c
>> @@ -2,6 +2,7 @@
>> /*
>> * Copyright (C) STMicroelectronics 2020 - All Rights Reserved
>> */
>> +#include <linux/component.h>
>> #include <linux/device.h>
>> #include <linux/kernel.h>
>> #include <linux/module.h>
>> @@ -55,6 +56,24 @@ static int rpmsg_ns_cb(struct rpmsg_device *rpdev, void *data, int len,
>> return 0;
>> }
>>
>> +static int rpmsg_ns_bind(struct device *dev, struct device *master, void *data)
>> +{
>> + dev_info(dev, "rpmsg ns bound\n");
>> +
>> + return 0;
>> +}
>> +
>> +static void rpmsg_ns_unbind(struct device *dev, struct device *master,
>> + void *data)
>> +{
>> + dev_info(dev, "rpmsg ns unbound\n");
>> +}
>> +
>> +static const struct component_ops rpmsg_ns_ops = {
>> + .bind = rpmsg_ns_bind,
>> + .unbind = rpmsg_ns_unbind,
>> +};
>> +
>> static int rpmsg_ns_probe(struct rpmsg_device *rpdev)
>> {
>> struct rpmsg_endpoint *ns_ept;
>> @@ -63,6 +82,7 @@ static int rpmsg_ns_probe(struct rpmsg_device *rpdev)
>> .dst = RPMSG_NS_ADDR,
>> .name = "name_service",
>> };
>> + int ret;
>>
>> /*
>> * Create the NS announcement service endpoint associated to the RPMsg
>> @@ -76,7 +96,9 @@ static int rpmsg_ns_probe(struct rpmsg_device *rpdev)
>> }
>> rpdev->ept = ns_ept;
>>
>> - return 0;
>> + ret = component_add(&rpdev->dev, &rpmsg_ns_ops);
>> +
>> + return ret;
>> }
>>
>> static struct rpmsg_driver rpmsg_ns_driver = {
>> @@ -104,5 +126,5 @@ module_exit(rpmsg_ns_exit);
>>
>> MODULE_DESCRIPTION("Name service announcement rpmsg Driver");
>> MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen@st.com>");
>> -MODULE_ALIAS("rpmsg_ns");
>> +MODULE_ALIAS("rpmsg:rpmsg_ns");
>> MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
>> index 30ef4a5de4ed..c28aac1295fa 100644
>> --- a/drivers/rpmsg/virtio_rpmsg_bus.c
>> +++ b/drivers/rpmsg/virtio_rpmsg_bus.c
>> @@ -11,6 +11,7 @@
>>
>> #define pr_fmt(fmt) "%s: " fmt, __func__
>>
>> +#include <linux/component.h>
>> #include <linux/dma-mapping.h>
>> #include <linux/idr.h>
>> #include <linux/jiffies.h>
>> @@ -67,11 +68,16 @@ struct virtproc_info {
>> struct mutex endpoints_lock;
>> wait_queue_head_t sendq;
>> atomic_t sleepers;
>> + struct component_match *match;
>> + struct completion completed;
>> + int bind_status;
>> };
>>
>> /* The feature bitmap for virtio rpmsg */
>> #define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */
>>
>> +#define BIND_TIMEOUT_MS 1000
>> +
>> /**
>> * struct rpmsg_hdr - common header for all rpmsg messages
>> * @src: source address
>> @@ -768,6 +774,17 @@ static void rpmsg_recv_done(struct virtqueue *rvq)
>> unsigned int len, msgs_received = 0;
>> int err;
>>
>> + /* Wait for all children to be bound */
>> + if (vrp->bind_status) {
>> + dev_dbg(dev, "cwait bind\n");
>> + if (!wait_for_completion_timeout(&vrp->completed,
>> + msecs_to_jiffies(BIND_TIMEOUT_MS)))
>> + dev_err(dev, "child device(s) binding timeout\n");
>> +
>> + if (vrp->bind_status)
>> + dev_err(dev, "failed to bind RPMsg sub device(s)\n");
>> + }
>> +
>> msg = virtqueue_get_buf(rvq, &len);
>> if (!msg) {
>> dev_err(dev, "uhm, incoming signal, but no used buffer ?\n");
>> @@ -808,6 +825,39 @@ static void rpmsg_xmit_done(struct virtqueue *svq)
>> wake_up_interruptible(&vrp->sendq);
>> }
>>
>> +static int virtio_rpmsg_compare(struct device *dev, void *data)
>> +{
>> + return dev == data;
>> +}
>> +
>> +static void virtio_rpmsg_unbind(struct device *dev)
>> +{
>> + /* undbind all child components */
>> + component_unbind_all(dev, NULL);
>> +}
>> +
>> +static int virtio_rpmsg_bind(struct device *dev)
>> +{
>> + struct virtio_device *vdev = dev_to_virtio(dev);
>> + struct virtproc_info *vrp = vdev->priv;
>> +
>> + dev_dbg(dev, "Bind virtio rpmsg sub devices\n");
>> +
>> + vdev = container_of(dev, struct virtio_device, dev);
>> + vrp->bind_status = component_bind_all(dev, NULL);
>> + if (vrp->bind_status)
>> + dev_err(dev, "bind virtio rpmsg failed\n");
>> +
>> + complete(&vrp->completed);
>> +
>> + return vrp->bind_status;
>> +}
>> +
>> +static const struct component_master_ops virtio_rpmsg_cmp_ops = {
>> + .bind = virtio_rpmsg_bind,
>> + .unbind = virtio_rpmsg_unbind,
>> +};
>> +
>> static int rpmsg_probe(struct virtio_device *vdev)
>> {
>> vq_callback_t *vq_cbs[] = { rpmsg_recv_done, rpmsg_xmit_done };
>> @@ -892,6 +942,7 @@ static int rpmsg_probe(struct virtio_device *vdev)
>> /* if supported by the remote processor, enable the name service */
>> if (virtio_has_feature(vdev, VIRTIO_RPMSG_F_NS)) {
>> vch = kzalloc(sizeof(*vch), GFP_KERNEL);
>> +
>> if (!vch) {
>> err = -ENOMEM;
>> goto free_coherent;
>> @@ -911,6 +962,20 @@ static int rpmsg_probe(struct virtio_device *vdev)
>> err = rpmsg_ns_register_device(rpdev_ns);
>> if (err)
>> goto free_coherent;
>> + /* register a component associated to the virtio platform */
>> + component_match_add_release(&vdev->dev, &vrp->match,
>> + NULL, virtio_rpmsg_compare,
>> + &rpdev_ns->dev);
>> +
>> + vrp->bind_status = -ENXIO;
>> + init_completion(&vrp->completed);
>> + err = component_master_add_with_match(&vdev->dev,
>> + &virtio_rpmsg_cmp_ops,
>> + vrp->match);
>> + if (err) {
>> + dev_err(&vdev->dev, "failed to bind virtio rpmsg\n");
>> + goto free_coherent;
>> + }
>> }
>>
>> /*
>> --
>> 2.17.1
>>
>>
>>
>>

\
 
 \ /
  Last update: 2020-11-12 10:06    [W:0.143 / U:1.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site