lkml.org 
[lkml]   [2020]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use
Date
Use reset_control_rearm() call if an error occurs in case
phy_meson_gxl_usb2_init() fails after reset() has been called ; or in case
phy_meson_gxl_usb2_exit() is called i.e the resource is no longer used
and the reset line may be triggered again by other devices.

reset_control_rearm() keeps use of triggered_count sane in the reset
framework. Therefore, use of reset_control_reset() on shared reset line
should be balanced with reset_control_rearm().

Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reported-by: Jerome Brunet <jbrunet@baylibre.com>
---
Important:
Please DO NOT merge before this patch [0] is merged, it adds
reset_control_rearm() call to the reset framework API.

[0] https://lore.kernel.org/lkml/20201112230043.28987-1-aouledameur@baylib
re.com/

drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
index 43ec9bf24abf..e366c0b1e339 100644
--- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -114,8 +114,10 @@ static int phy_meson_gxl_usb2_init(struct phy *phy)
return ret;

ret = clk_prepare_enable(priv->clk);
- if (ret)
+ if (ret) {
+ reset_control_rearm(priv->reset);
return ret;
+ }

return 0;
}
@@ -124,6 +126,7 @@ static int phy_meson_gxl_usb2_exit(struct phy *phy)
{
struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);

+ reset_control_rearm(priv->reset);
clk_disable_unprepare(priv->clk);

return 0;
--
2.17.1
\
 
 \ /
  Last update: 2020-11-13 01:06    [W:0.098 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site