lkml.org 
[lkml]   [2020]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] clocksource/drivers/orion: add missing clk_disable_unprepare() on error path
Date
After calling clk_prepare_enable(), clk_disable_unprepare() need
be called on error path.

Fixes: fbe4b3566ddc ("clocksource/drivers/orion: Convert init function...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
drivers/clocksource/timer-orion.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/clocksource/timer-orion.c b/drivers/clocksource/timer-orion.c
index d01ff4181867..5101e834d78f 100644
--- a/drivers/clocksource/timer-orion.c
+++ b/drivers/clocksource/timer-orion.c
@@ -143,7 +143,8 @@ static int __init orion_timer_init(struct device_node *np)
irq = irq_of_parse_and_map(np, 1);
if (irq <= 0) {
pr_err("%pOFn: unable to parse timer1 irq\n", np);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out_unprep_clk;
}

rate = clk_get_rate(clk);
@@ -160,7 +161,7 @@ static int __init orion_timer_init(struct device_node *np)
clocksource_mmio_readl_down);
if (ret) {
pr_err("Failed to initialize mmio timer\n");
- return ret;
+ goto out_unprep_clk;
}

sched_clock_register(orion_read_sched_clock, 32, rate);
@@ -170,7 +171,7 @@ static int __init orion_timer_init(struct device_node *np)
"orion_event", NULL);
if (ret) {
pr_err("%pOFn: unable to setup irq\n", np);
- return ret;
+ goto out_unprep_clk;
}

ticks_per_jiffy = (clk_get_rate(clk) + HZ/2) / HZ;
@@ -183,5 +184,9 @@ static int __init orion_timer_init(struct device_node *np)
orion_delay_timer_init(rate);

return 0;
+
+out_unprep_clk:
+ clk_disable_unprepare(clk);
+ return ret;
}
TIMER_OF_DECLARE(orion_timer, "marvell,orion-timer", orion_timer_init);
--
2.25.1
\
 
 \ /
  Last update: 2020-11-11 07:49    [W:0.036 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site