lkml.org 
[lkml]   [2020]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 00/18] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name
Date
As the subject states this series is an attempt to harmonize the xHCI,
EHCI, OHCI and DWC USB3 DT nodes with the DT schema introduced in the
framework of the patchset [1].

Firstly as Krzysztof suggested we've deprecated a support of DWC USB3
controllers with "synopsys,"-vendor prefix compatible string in favor of
the ones with valid "snps,"-prefix. It's done in all the DTS files,
which have been unfortunate to define such nodes.

Secondly we suggest to fix the snps,quirk-frame-length-adjustment property
declaration in the Amlogic meson-g12-common.dtsi DTS file, since it has
been erroneously declared as boolean while having uint32 type. Neil said
it was ok to init that property with 0x20 value.

Thirdly the main part of the patchset concern fixing the xHCI, EHCI/OHCI
and DWC USB3 DT nodes name as in accordance with their DT schema the
corresponding node name is suppose to comply with the Generic USB HCD DT
schema, which requires the USB nodes to have the name acceptable by the
regexp: "^usb(@.*)?". Such requirement had been applicable even before we
introduced the new DT schema in [1], but as we can see it hasn't been
strictly implemented for a lot the DTS files. Since DT schema is now
available the automated DTS validation shall make sure that the rule isn't
violated.

Note most of these patches have been a part of the last three patches of
[1]. But since there is no way to have them merged in in a combined
manner, I had to move them to the dedicated series and split them up so to
be accepted by the corresponding subsystem maintainers one-by-one.

[1] Link: https://lore.kernel.org/linux-usb/20201014101402.18271-1-Sergey.Semin@baikalelectronics.ru/
Changelog v1:
- As Krzysztof suggested I've created a script which checked whether the
node names had been also updated in all the depended dts files. As a
result I found two more files which should have been also modified:
arch/arc/boot/dts/{axc003.dtsi,axc003_idu.dtsi}
- Correct the USB DWC3 nodes name found in
arch/arm64/boot/dts/apm/{apm-storm.dtsi,apm-shadowcat.dtsi} too.

Changelog v2:
- Drop the patch:
[PATCH 01/29] usb: dwc3: Discard synopsys,dwc3 compatibility string
and get back the one which marks the "synopsys,dwc3" compatible string
as deprecated into the DT schema related series.
- Drop the patches:
[PATCH 03/29] arm: dts: am437x: Correct DWC USB3 compatible string
[PATCH 04/29] arm: dts: exynos: Correct DWC USB3 compatible string
[PATCH 07/29] arm: dts: bcm53x: Harmonize EHCI/OHCI DT nodes name
[PATCH 08/29] arm: dts: stm32: Harmonize EHCI/OHCI DT nodes name
[PATCH 16/29] arm: dts: bcm5301x: Harmonize xHCI DT nodes name
[PATCH 19/29] arm: dts: exynos: Harmonize DWC USB3 DT nodes name
[PATCH 21/29] arm: dts: ls1021a: Harmonize DWC USB3 DT nodes name
[PATCH 22/29] arm: dts: omap5: Harmonize DWC USB3 DT nodes name
[PATCH 24/29] arm64: dts: allwinner: h6: Harmonize DWC USB3 DT nodes name
[PATCH 26/29] arm64: dts: exynos: Harmonize DWC USB3 DT nodes name
[PATCH 27/29] arm64: dts: layerscape: Harmonize DWC USB3 DT nodes name
since they have been applied to the corresponding maintainers repos.
- Fix drivers/usb/dwc3/dwc3-qcom.c to be looking for the "usb@"-prefixed
sub-node and falling back to the "dwc3@"-prefixed one on failure.

Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Rafal Milecki <zajec5@gmail.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Khuong Dinh <khuong@os.amperecomputing.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Jun Li <lijun.kernel@gmail.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Serge Semin (18):
arm: dts: keystone: Correct DWC USB3 compatible string
arm64: dts: amlogic: meson-g12: Set FL-adj property value
arc: dts: Harmonize EHCI/OHCI DT nodes name
arm: dts: hisi-x5hd2: Harmonize EHCI/OHCI DT nodes name
arm: dts: lpc18xx: Harmonize EHCI/OHCI DT nodes name
arm64: dts: hisi: Harmonize EHCI/OHCI DT nodes name
mips: dts: jz47x: Harmonize EHCI/OHCI DT nodes name
mips: dts: sead3: Harmonize EHCI/OHCI DT nodes name
mips: dts: ralink: mt7628a: Harmonize EHCI/OHCI DT nodes name
powerpc: dts: akebono: Harmonize EHCI/OHCI DT nodes name
arm64: dts: marvell: cp11x: Harmonize xHCI DT nodes name
arm: dts: marvell: armada-375: Harmonize DWC USB3 DT nodes name
arm: dts: keystone: Harmonize DWC USB3 DT nodes name
arm: dts: stih407-family: Harmonize DWC USB3 DT nodes name
arm64: dts: apm: Harmonize DWC USB3 DT nodes name
arm64: dts: hi3660: Harmonize DWC USB3 DT nodes name
usb: dwc3: qcom: Detect DWC3 DT-nodes with "usb"-prefixed names
arm64: dts: qcom: Harmonize DWC USB3 DT nodes name

arch/arc/boot/dts/axc003.dtsi | 4 ++--
arch/arc/boot/dts/axc003_idu.dtsi | 4 ++--
arch/arc/boot/dts/axs10x_mb.dtsi | 4 ++--
arch/arc/boot/dts/hsdk.dts | 4 ++--
arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 2 +-
arch/arm/boot/dts/armada-375.dtsi | 2 +-
arch/arm/boot/dts/hisi-x5hd2.dtsi | 4 ++--
arch/arm/boot/dts/keystone-k2e.dtsi | 6 +++---
arch/arm/boot/dts/keystone.dtsi | 4 ++--
arch/arm/boot/dts/lpc18xx.dtsi | 4 ++--
arch/arm/boot/dts/stih407-family.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 2 +-
arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 4 ++--
arch/arm64/boot/dts/apm/apm-storm.dtsi | 6 +++---
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 2 +-
arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 4 ++--
arch/arm64/boot/dts/hisilicon/hip06.dtsi | 4 ++--
arch/arm64/boot/dts/hisilicon/hip07.dtsi | 4 ++--
arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +-
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 2 +-
arch/arm64/boot/dts/qcom/qcs404.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +-
arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +-
arch/mips/boot/dts/ingenic/jz4770.dtsi | 2 +-
arch/mips/boot/dts/mti/sead3.dts | 2 +-
arch/mips/boot/dts/ralink/mt7628a.dtsi | 2 +-
arch/powerpc/boot/dts/akebono.dts | 6 +++---
drivers/usb/dwc3/dwc3-qcom.c | 3 ++-
34 files changed, 58 insertions(+), 57 deletions(-)

--
2.28.0

\
 
 \ /
  Last update: 2020-11-11 10:18    [W:0.296 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site