lkml.org 
[lkml]   [2020]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 04/19] net: phy: at803x: implement generic .handle_interrupt() callback
Date
From: Ioana Ciornei <ioana.ciornei@nxp.com>

In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.

Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
Changes in v2:
- adjust .handle_interrupt() so that we only take into account the
enabled IRQs.

drivers/net/phy/at803x.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index ed601a7e46a0..c7f91934cf82 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -628,6 +628,32 @@ static int at803x_config_intr(struct phy_device *phydev)
return err;
}

+static irqreturn_t at803x_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status, int_enabled;
+
+ irq_status = phy_read(phydev, AT803X_INTR_STATUS);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ /* Read the current enabled interrupts */
+ int_enabled = phy_read(phydev, AT803X_INTR_ENABLE);
+ if (int_enabled < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ /* See if this was one of our enabled interrupts */
+ if (!(irq_status & int_enabled))
+ return IRQ_NONE;
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
static void at803x_link_change_notify(struct phy_device *phydev)
{
/*
@@ -1064,6 +1090,7 @@ static struct phy_driver at803x_driver[] = {
.read_status = at803x_read_status,
.ack_interrupt = at803x_ack_interrupt,
.config_intr = at803x_config_intr,
+ .handle_interrupt = at803x_handle_interrupt,
.get_tunable = at803x_get_tunable,
.set_tunable = at803x_set_tunable,
.cable_test_start = at803x_cable_test_start,
@@ -1084,6 +1111,7 @@ static struct phy_driver at803x_driver[] = {
/* PHY_BASIC_FEATURES */
.ack_interrupt = at803x_ack_interrupt,
.config_intr = at803x_config_intr,
+ .handle_interrupt = at803x_handle_interrupt,
}, {
/* Qualcomm Atheros AR8031/AR8033 */
PHY_ID_MATCH_EXACT(ATH8031_PHY_ID),
@@ -1102,6 +1130,7 @@ static struct phy_driver at803x_driver[] = {
.aneg_done = at803x_aneg_done,
.ack_interrupt = &at803x_ack_interrupt,
.config_intr = &at803x_config_intr,
+ .handle_interrupt = at803x_handle_interrupt,
.get_tunable = at803x_get_tunable,
.set_tunable = at803x_set_tunable,
.cable_test_start = at803x_cable_test_start,
@@ -1122,6 +1151,7 @@ static struct phy_driver at803x_driver[] = {
/* PHY_BASIC_FEATURES */
.ack_interrupt = at803x_ack_interrupt,
.config_intr = at803x_config_intr,
+ .handle_interrupt = at803x_handle_interrupt,
.cable_test_start = at803x_cable_test_start,
.cable_test_get_status = at803x_cable_test_get_status,
}, {
@@ -1134,6 +1164,7 @@ static struct phy_driver at803x_driver[] = {
/* PHY_BASIC_FEATURES */
.ack_interrupt = &at803x_ack_interrupt,
.config_intr = &at803x_config_intr,
+ .handle_interrupt = at803x_handle_interrupt,
.cable_test_start = at803x_cable_test_start,
.cable_test_get_status = at803x_cable_test_get_status,
.read_status = at803x_read_status,
--
2.28.0
\
 
 \ /
  Last update: 2020-11-01 13:53    [W:0.387 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site