lkml.org 
[lkml]   [2020]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v6 9/9] arm64: dts: rockchip: add isp and sensors for Scarlet
Date
Am Dienstag, 20. Oktober 2020, 21:38:50 CET schrieb Helen Koike:
> From: Eddie Cai <eddie.cai.linux@gmail.com>
>
> Enable ISP and camera sensor ov2685 and ov5695 for Scarlet Chromebook
>
> Verified with:
> make ARCH=arm64 dtbs_check
>
> Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
> Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
> Signed-off-by: Tomasz Figa <tfiga@chromium.org>
> Signed-off-by: Helen Koike <helen.koike@collabora.com>
> Reviewed-by: Tomasz Figa <tfiga@chromium.org>


looks good, and I'd like to apply this one after the drivers/media-patches
of this series got applied.


Thanks
Heiko

> ---
> .../boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 74 +++++++++++++++++++
> 1 file changed, 74 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
> index 60cd1c18cd4e0..beee5fbb34437 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
> @@ -296,6 +296,52 @@ camera: &i2c7 {
>
> /* 24M mclk is shared between world and user cameras */
> pinctrl-0 = <&i2c7_xfer &test_clkout1>;
> +
> + /* Rear-facing camera */
> + wcam: camera@36 {
> + compatible = "ovti,ov5695";
> + reg = <0x36>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&wcam_rst>;
> +
> + clocks = <&cru SCLK_TESTCLKOUT1>;
> + clock-names = "xvclk";
> +
> + avdd-supply = <&pp2800_cam>;
> + dvdd-supply = <&pp1250_cam>;
> + dovdd-supply = <&pp1800_s0>;
> + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
> +
> + port {
> + wcam_out: endpoint {
> + remote-endpoint = <&mipi_in_wcam>;
> + data-lanes = <1 2>;
> + };
> + };
> + };
> +
> + /* Front-facing camera */
> + ucam: camera@3c {
> + compatible = "ovti,ov2685";
> + reg = <0x3c>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&ucam_rst>;
> +
> + clocks = <&cru SCLK_TESTCLKOUT1>;
> + clock-names = "xvclk";
> +
> + avdd-supply = <&pp2800_cam>;
> + dovdd-supply = <&pp1800_s0>;
> + dvdd-supply = <&pp1800_s0>;
> + reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
> +
> + port {
> + ucam_out: endpoint {
> + remote-endpoint = <&mipi_in_ucam>;
> + data-lanes = <1>;
> + };
> + };
> + };
> };
>
> &cdn_dp {
> @@ -353,10 +399,38 @@ &io_domains {
> gpio1830-supply = <&pp1800_s0>; /* APIO4_VDD; 4c 4d */
> };
>
> +&isp0 {
> + status = "okay";
> +
> + ports {
> + port@0 {
> + mipi_in_wcam: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&wcam_out>;
> + data-lanes = <1 2>;
> + };
> +
> + mipi_in_ucam: endpoint@1 {
> + reg = <1>;
> + remote-endpoint = <&ucam_out>;
> + data-lanes = <1>;
> + };
> + };
> + };
> +};
> +
> +&isp0_mmu {
> + status = "okay";
> +};
> +
> &max98357a {
> sdmode-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
> };
>
> +&mipi_dphy_rx0 {
> + status = "okay";
> +};
> +
> &mipi_dsi {
> status = "okay";
> clock-master;
>




\
 
 \ /
  Last update: 2020-11-01 11:55    [W:0.071 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site