lkml.org 
[lkml]   [2020]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net] arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETC
[+Ioana; the reference commit has a typo in her email address]

Am 2020-11-01 14:19, schrieb Michael Walle:
> Since commit 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX")
> the
> network port of the Kontron sl28 board is broken. After the migration
> to
> phylink the device tree has to specify the in-band-mode property. Add
> it.
>
> Fixes: 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX")
> Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git
> a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
> index f46eb47cfa4d..8161dd237971 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
> @@ -75,6 +75,7 @@
> &enetc_port0 {
> phy-handle = <&phy0>;
> phy-connection-type = "sgmii";
> + managed = "in-band-status";
> status = "okay";
>
> mdio {

--
-michael

\
 
 \ /
  Last update: 2020-11-01 14:45    [W:0.082 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site